0
What else can I help you with?
How much concrete is needed to pour a 9x12 foot slab?
9x12 feet at 4 inches deep: 1.3 cubic yards.
How many yards of concrete would you need to pour a 12 x 12 slab 4 thick?
1.78 cu. yds.
How much concrete to pour a 12ft by 12ft slab?
12 x 12 feet, 4 inches deep: 1.8 cubic yards, minimum.
How many yards of concrete it will take to pour a concrete slab that is 24ft x 24ft x 4 inches thick?
7.1
How many yards of concrete it will take to pour a concrete slab that is 30ft x 40ft x 4 inches thick?
15 cubic yards
How much does it cost to pour a concrete driveway?
how much does it cost to form and pour concrete in Mobile, AL
How much to pour a concrete slab 12x24?
about how much to pour a concrete slaba 12 x 14'
How much concrete for 12 feet by 4.5 feet?
The depth of the pour would also be necessary to calculate the volume of concrete needed.
Can you pour a concrete sidewalk over top of another existing concrete sidewalk?
No do to the concrete settling the concrete on top would split
How much concrete do you need to pour in a floor measuring 28 feet wide 72 feet long and 6 inches deep?
you would need 37.33 yards of concrete or 38 to be safe
How do you cover brick with concrete?
POUR THE CONCRETE OVER THE BRICK
How to prepare the ground to pour a concrete curb?
There are a number of ways in which you could prepare the ground to pour a concrete curb. You could level the surface and pour sand.
How much should it cost to take out an existing concrete 700 sq ft driveway and re-pour it with new concrete?
I would say about 9 dollars a sq/ft. I would say about 9 dollars a sq/ft.
Which measurements are required to use a concrete calculator?
A concrete calculator helps one determine how much concrete will be needed for a pour. To get an accurate reading, one needs to have the length, width and thickness desired.
How to pour a concrete pad correctly?
To pour a concrete pad correctly, first, prepare the site by leveling the ground and creating a form to contain the concrete. Next, mix the concrete according to the instructions and pour it into the form. Use a screed to level the concrete and a float to smooth the surface. Allow the concrete to cure for the recommended time before removing the form.
Can you pour concrete into a column and it not crack?
Yes but concrete is going to crack if it has too much stress. If it's a decorative column then use a 4000 mix. If it has a load on it you will have to figure how much weight is going to be on it.
Can you get a handprint off concrete?
pour more concrete over the top and smooth it out
