R$10 for m2 (US$4)
Tile setters average $12 to $30 per hour, depending on the tile, region of the country, and years of experience. That converts to about $500 to $1200 per week on a 40 hour work week.
$1.27 per sq ft.
depends on the thickness of your bedding
6 Bags of masons lime
545 tiles, as one tile is 1 sq. ft. Divide total square footage by 1.
fifteen dollars an hour
Yes, it is possible to lay new tile over existing tile as long as the existing tile is in good condition and properly prepared.
Youtube is a great place to go to find instructions on how to lay tile.
Yes, you can lay vinyl flooring over tile as long as the tile is in good condition and the surface is clean and smooth.
Yes, you can lay new tile on top of existing tile as long as the existing tile is in good condition and properly prepared. It is important to ensure that the surface is clean, level, and free of any loose tiles or debris before installing the new tile.
To lay tile, you will need tools such as a tile cutter, trowel, grout float, and spacers. Materials required include tiles, adhesive, grout, and sealer.
No
It is possible but I would not reccomend it. If possible remove the old tile before laying the new tile. If you want to avoid removing the old tile you can lay a cement board over the old tile before installing the new tile.
The per square foot to lay tile in Alberta depends upon the type of tiled being installed.
You must make the measurements that you need to lay the tile, then lay out the tiles on the floor to help familiarize yourself with the pattern you are going to be working with. Lay your grouting adhesive and then finally the tiles.
Yes, you can lay new flooring over existing tile as long as the tile is in good condition and the new flooring material is compatible with it. Proper preparation and installation techniques are important for a successful outcome.
Yes, you can lay engineered hardwood over tile flooring as long as the tile is in good condition and the proper preparation steps are taken to ensure a flat and stable surface for installation.