It is possible but I would not reccomend it. If possible remove the old tile before laying the new tile. If you want to avoid removing the old tile you can lay a cement board over the old tile before installing the new tile.
It is not too difficult to lay tiling down yourself if you follow some simple steps before even attempting the task. You want to make sure that you lay the tiles down on and use sanded grout.
They are wondering if you know how to install tiles.
Most ceramic tiles are laid over a wooden subfloor, except for those on the ground floor of a house with a slab foundation. I will add to the answer above by saying that you will need to use a polymer-modified thinset morter when installing ceramic tiles over wood. Most tile-setting morters available today are "modified", but check to be sure, because regular morters are designed to be used over concrete and will not adhere properly to wood. Also, if the floor area is large and there is more than a tiny bit of flex in the floor, you might end up with cracked tiles, especially if you or your family or guests are heavy. To avoid this, it might be necessary to build up the thickness of the floor by adding another layer of 3/4" plywood, or by using the older method of wire mesh and concrete over the existing wood (in which case you would not need a modified morter).
Yes, when you lay it on a diagonal, there is more waste. Generally, with a straight lay, you need 6-10% waste. With diagonal, it's best to have at least 15% extra.
I typically pick the longest wall or the straightest line in the room that has the most exposure and start there with full tiles. Another method would be to find the center point of the room and lay your first tile there. Then when you get to the walls all opposite walls will have the same cut size.
nope
It is possible to lay your own ceramic tiles at home but be cautious because it requires skill and a lot of practice to lay them correctly and make it look nice.
To lay ceramic tiles on a concrete floor, first clean and prepare the surface. Apply a layer of thin-set mortar using a trowel, then place the tiles in a desired pattern. Use spacers to maintain even spacing between tiles. Allow the mortar to dry completely before grouting the tiles. Finally, seal the grout to protect it from stains and moisture.
Yes. You should use a good quality underlay with it though to reduce the noise of the laminate knocking on the tiles.
To effectively lay ceramic tile in your home, start by preparing the surface, measuring and planning the layout, applying adhesive, setting the tiles, cutting tiles as needed, grouting, and sealing the tiles for protection. Make sure to follow manufacturer instructions and use the right tools for a successful installation.
It is not too difficult to lay tiling down yourself if you follow some simple steps before even attempting the task. You want to make sure that you lay the tiles down on and use sanded grout.
If the tiles are down tight and the added height wont bother you, it is fine to go over the tile with carpet glued down or over pad. The installers will hate setting the tackstrip, but it is part of the job.. you are good to go.
To lay ceramic tile on concrete floors effectively, follow these steps: Clean and prepare the concrete surface by removing any debris or dust. Apply a layer of thin-set mortar to the concrete using a trowel. Place the ceramic tiles on the mortar, pressing them firmly into place. Use spacers to ensure even spacing between tiles. Allow the mortar to dry completely before grouting the tiles. Apply grout between the tiles, wiping away excess with a damp sponge. Seal the grout to protect it from stains and moisture. Following these steps will help you lay ceramic tile on concrete floors effectively.
You can lay tiles again but make sure you buy proper mortar. You can install any kind of floating floor such as laminate, engineering wood, interlocking vinyl tile. Your main concern should be structural integrity of existing floor, if its not falling you can do pretty much anything
To lay ceramic tile on concrete, first clean and level the concrete surface. Apply a layer of thin-set mortar using a trowel, then place the tiles in the desired pattern. Use spacers to maintain even spacing between tiles. Once the mortar has dried, apply grout between the tiles and wipe off excess grout with a damp sponge. Allow the grout to dry completely before walking on the tiles.
To effectively lay ceramic tile on concrete surfaces, follow these steps: Clean and prepare the concrete surface by removing any debris and ensuring it is level. Apply a layer of thin-set mortar to the concrete using a trowel. Place the ceramic tiles on the mortar, pressing them firmly into place. Use spacers to maintain even spacing between tiles. Allow the mortar to dry completely before grouting the tiles. Apply grout between the tiles, wiping away excess with a damp sponge. Seal the grout to protect it from stains and moisture.
To lay ceramic tile effectively and efficiently, start by preparing the surface, measuring and planning the layout, applying adhesive evenly, setting the tiles in place, and grouting the joints. Use the right tools and techniques to ensure a professional finish.