0
What else can I help you with?
How much batter for 14 by 2 inch round cake pan?
For a 14 by 2 inch round cake pan, you'll typically need about 6 to 8 cups of batter, depending on the specific recipe and desired cake height. A standard cake recipe usually yields around 2 to 3 cups of batter for a smaller pan, so you may need to adjust or double the recipe accordingly. Always check for doneness by inserting a toothpick or cake tester in the center; it should come out clean when the cake is done.
How much concrete is needed for a slab 10 feet in diameter by 4 inches thick?
A 10-foot round slab at 4 inches requires 1 cubic yard.
How many cups batter for 2 6x2 inch round cake pans?
For two 6x2 inch round cake pans, you typically need about 3 to 4 cups of batter. Most standard cake recipes yield around 2 to 3 cups of batter, which may be enough for one pan, so you would likely need to double the recipe or adjust accordingly to ensure both pans are filled adequately. Always check the specific recipe you’re using for precise measurements, as different types of cakes may vary in batter volume.
How much batter in a 12 by 2 round cake pan?
For a 12 by 2-inch round cake pan, you typically need about 6 to 7 cups of batter. This amount can vary slightly depending on the specific recipe, but it generally aligns with the volume needed for a cake of that size. Make sure to fill the pan no more than two-thirds full to allow for rising. Always check the specific recipe for any adjustments based on ingredients.
How do you round off 4.5875 inches?
The answer depends on the extent to which you need to round it.
What is the diameter of a 60 inch round table across?
If the table is 60 inches across, the diameter is 60 inches.
Diameter of a 40 caliber round?
.4005 inches.
Find the area of a circle that has a diameter of 11 inches Round your answer to the nearest hundredth?
A circle with a diameter of 11 inches has an area of 95.03 square inches.
If a tree is 51 inches in diameter how round is that in feet?
Assuming that the tree is approximately circular, if it is 51 inches in diameter then it is a little over 160 inches in circumference.
What is the diameter of a 12 inch round circle?
diameter = circumference/pi = 12/pi inches
What is the circumference of a pan when the diameter is 13.5 inches?
Assuming the pan is round, multiply the diameter times pi.
What is the diameter of a 72 inch round table?
The diameter of a 72-inch round table is 72 inches, as the term "diameter" refers to the distance across the table through its center. This means that if you measure from one edge of the table to the opposite edge, it will be 72 inches.
The diameter of a round dinne plate is 10 inches what is the area of the plate?
25pi
What is is the area of a round table top whose diameter is 38 inches?
119.32
Gallons of water in a round pool that is 27 inches deep and 60 inches in diameter?
489.76 gallons of water.
What is the area of a circular table top with a diameter of 17 inches round to the nearest square inch?
226.98 inches squared.
How many cubic feet in a round hole 12 inches diameter and 30 inches deep?
1.963 cubic feet
