Usually return from interrupt restores the flags so that the interrupted code can continue to execute properly. Return from subroutine does not need to do that instruction is used intentionally in that flow of code and known that the flags are or are not destroyed depending on the architecture.
Both are used for Return operations. But the difference is IRET uses extra 2 bytes along with 2 bytes(making it 4 bytes) for poping from stack. And RET uses only 2 byte of instruction for Poping. IRET is used to switch from Virtual Mode to Protected Mode whereas RET isn't.
iret pops an extra 2 bytes off the stack, as interrupt calls save the flags in addition to the return address
RET pops the PC off of the stack, while IRET pops both the flags and the PC off of the stack.
IRET stands for RETurn from Interrupt.
As of July 2014, the market cap for Investors Real Estate Trust (IRET) is $942,807,991.74.
IRET
iret's amysterrruy
The symbol for Investors Real Estate Trust in the NYSE is: IRET.
By ABDULLAH ABID Secretary Info & IT GLOBAL PEACE COUNCIL PAKISTAN. http://h.1asphost.com/gpcp/org The Interrupt-In-Service-Flag is set at the beginning of an interrupt-acknowledge cycle. It is reset by the IRET (Interrupt-RETurn) instruction. When IIS is set, interrupts are disabled. When the Status-register is read, IIS always reads as '0'.
According to SOWPODS (the combination of Scrabble dictionaries used around the world) there are 1 words with the pattern -IRET--P. That is, eight letter words with 2nd letter I and 3rd letter R and 4th letter E and 5th letter T and 8th letter P. In alphabetical order, they are: firetrap
According to SOWPODS (the combination of Scrabble dictionaries used around the world) there are 1 words with the pattern -IRET-P-. That is, eight letter words with 2nd letter I and 3rd letter R and 4th letter E and 5th letter T and 7th letter P. In alphabetical order, they are: wiretaps
The 8086/8088 uses a stack pointer that points to the last pushed data on the stack, or to the last address + 1 of an unused stack. When you push something on the stack, the stack pointer is decremented by 2 and the data is written at that address. When you pop something off the stack, the data is read from the address and then the stack pointer is incremented by 2. Note that the sequence is important. On push we decrement and store - On pop we read and THEN increment. Pushing is akin to stacking papers on your desk on top of each other. You are working on the one on top. You want to do something else, so you put another on top and work on that. When you are done, you take the top off, put it away, and continue working on the first. This can be nested, arbitrarily deep, so long as you have sufficient memory. Just remember that the stack is backwards in memory, growing from top down. You can explicitly push/pop with the push/pop instructions, or you can implicitly push/pop with the call/ret and int/iret instructions.