Go see your professional body piercer for some help putting the ring in, there are some tricks you need to learn when changing jewellery without damaging the piercing.
Well , if you want to put in the labret What you do is you Take off the little ball or stud at the end and set it aside , then pull your lip forward and put the screw part through your hole from the inside. If you haven't got the right gauge what i did was i put the screw part from the outside and the stud from the inside to break the skin , then it was perfect Happy Piercing xx Iris.
not all rings with balls have to screw on, it depends what typre you're talking about some times i get the confusion when some wank stain calls a stud a ring, guessing that its a ring, its not always a screw on ring, my lip ring you clip the ball in, there is a hole running through the ball and out the other side and you put one side of the hole on one side of the ring and clip in the other side. hope this helped, next time ask the person who sells it.
Screw the ball back on the jewellery.
Yeah. Some tongue ring balls are pretty big and may look tacky on lip rings.
Place the ring then place the captive bead over the seam
yeah you should be able to, as long as the lip ring is the same thickness as the stud you had your nose pierced with, otherwise the ring will not go through. :) hope this helped.
sorry, you can't
Either it isn't screwed on tight enough or if its a captive ball ring, the ring isn't tight enough. So either use pliers to squeeze the ring tighter or screw it on.
Lip ring is not a compound word.
Yes it's called a lip ring.
I think you're describing a Captive ball/bead ring. Its really difficult to explain by typing it out and can be tricky to figure out for the first time. The best thing is to look up videos on how to open/close a CBR on youtube or something like that.
To get a ring in your lip.