answersLogoWhite

0

a ladder pole strap is a nylon strap used to secure an extension ladder to a utility pole to help avoid "kickout." There are models designed to be used at the base of the ladder (between the 4th and 5th rungs) and those designed to secure the top of the ladder to the pole (or strand). An example of a ladder pole strap would be the Laddermate LM100.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is a occy strap used for?

humping pole


How do you program a Toshiba ct 90325 remote?

You get a strap on and ride that soul pole to freedom!


How do you fold a dial safety ladder corporation safety ladder once it is opened up?

To fold back up, you must alternately rotate each rung 180 degrees back and forth as you fold it up in order to make it compact enough for the nylon strap to reach around and close with the velcro. Once initially velcroed close, if you hold it vertically, it will settle a bit and you can adjust the velcro to hold the strap even tighter around the ladder.


Lines of longitude are semicircles that extend from the north pole to the south pole?

No. Longitude is east and west of the equator. Lines of Latitude run from the north pole (prime meridian) to the south pole. Try thinking of latitude as the word "ladder" because ladders go up and down. Just a hint ;)


What are the answer to cool drink cool drinks word ladder?

Oh, dude, a word ladder for "cool" to "drink" would go like this: cool, pool, poll, pole, pole, poke, pike, dike, diak, diks, disk, and finally drink. It's like climbing a linguistic mountain, but with less sweat and more letters. So, there you go, the answer to your cool drink word ladder quest.


What tool to rotate a pole that is already in the ground?

To rotate a pole that is already in the ground, you can use a pole jack or a pole hoist, which can provide leverage to lift and turn the pole. Additionally, a come-along or ratchet strap can help to pull and rotate the pole if it's stuck. If the pole is deeply embedded, digging around the base may be necessary to reduce resistance. Always ensure safety precautions are followed to avoid injury during the process.


When mounting a meter base to a pole what kind of bracket do you use?

I generally use four pieces of "unistrut" to make a mounting bracket. I attach the unistrut to the pole using either lag screws or strap. It needs to be secure.


How do you cut down a ski pole?

# Remove strap from grip. # Soak grip and top of pole in hot water for 5 mins. # Get your strongest friend to twist the grip back and forth until it slides off. Don't worry, it will work lose - keep trying. # Cut off pole using hacksaw. # Push grip back onto pole. Be sure it goes on all the way. Push pole against wall or floor to drive it into the grip all the way. # Replace strap on grip.


What is the syllable for strap?

There is only 1 syllable in "strap."


What is the best way to carry pole vault poles on your car?

I personally strap them to the roof of my car but ensure they are in a waterproof bag or tube to prevent them form getting wet and/or damaged.


How do you use an aluminum extension ladder?

Before use, perform a thorough inspection and look for damage, bent rungs, grease on tread, defective feet, etc. Follow the labels on the ladder and the owner's manual. If you don't have the manual you can download a copy from the manufacturer's website. When you set the ladder, keep clear of electrical lines, Lean the ladder against the structure at a 4:1 (with your toes at the base of the ladder, your fingertips should touch the ladder with your arms extended). Check that the surface is firm and level. If the ground is soft, you can lay down a plywood square so the ladder won't sink. Check that the ladder won't kick out. If you are on hard pavement, ensure that the feet have the rubber tread down. Some ladders have "claws" on the feet that can be flipped to bite into the dirt. Extend the ladder so that it is between 3 and 4 feet above the top of the structure if you need to step off the ladder onto a roof. Secure the top of the ladder to the structure with a rope, strap or chain so the top won't slide. Maintain 3 points of contact while you climb. Always climb facing the ladder. Don't overload the ladder. Add your weight and what you are carrying up the ladder. Never put 2 people on the ladder at the same time.


How did a bangor knot get it name?

It got its name based upon its use. The Bangor Knot is one method to secure the line for a fireman's pole ladder, aslo referred to as a Bangor ladder. In the US, this knot is generally not taught or accepted for fireman's use, but it is used in some areas in the US.