Remove the fuel filter, the little bolt on top of the round part next to the carb. unbolt the two nuts that hold the carb to the intake. Remove the choke lever by pushing it in and twisting 1/4 turn to release it. The carb should come right out.
What is the weight of a 1966 45 hp mercury outboard motor
The dry weight of a Mercury 45 horsepower outboard engine is about 216 pounds. This amount, of course, would increased with brackets, gas, and oil.
i would like to know aii the specs on my mercury 45 outboard serial #4869920
The serial number OC121590 indicates that your Mercury 45 HP Classic Fifty outboard motor was likely manufactured in 1976. Mercury outboard motors typically use a coding system where the letters and numbers in the serial number correspond to the year of production. For more precise information, you can consult a Mercury outboard motor reference guide or contact a Mercury dealer.
To fill your Mercury Outboard Trim boat motor, lower your engine to a 45 degree angle, Make sure your boat is level. Remove fill screw, and add the amount of fluid required to fill.
The 1998 model, 4 hp Mercury outboard has a dry weight of 45 lbs.
From what I can find in serial number tables, your outboard is made in 1975. My refernce: http://www.marinshopen.se/Hj%c3%a4lpmedel/Modellguide/Mercury/3565Hk/tabid/107/Default.aspx
The 1987 model, 45 hp Mercury outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
The 2.5 hp & 3.5M Mercury both weighs 38 pounds. The 3.5 ML weighs 40 pounds.
Mercury Marine produced a 45 hp outboard motor from 1975 to 1990. This model was popular among recreational boaters for its reliability and performance during that period. If you need more specific details about particular years or variations, feel free to ask!
The 45 and 50hp model Mercury Classic Fifty requires a 50:1 fuel, to 2 cycle oil mix. This is roughly one pint of oil, to six gallons of fuel.
I believe it's either a 40 or 45.