answersLogoWhite

0

Just like you would repair car engine was a blown head gasket. Take it apart and replaced the head gasket. Make sure and have the head checked for cracks and warpage.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Does blue devil head gasket sealer really work?

yea it works good on a boat motor In my experience the only permanent repair for a blown head gasket is to replace it. These gasket sealers are only a temporary fix used in an emergency.


What causes water in motor oil in a boat motor?

Cracked block or blown head gasket.


Zero reading in one cylinder of a Ford v-8 in a boat Is this a blown head gasket?

It could be a head gasket, or valve trouble.


Signs of a blown head gasket on a outboard boat motor?

Usually a blown head gasket will allow cooling water to enter the affected cylinder. This can be detected by observing the spark plugs for water on the electrode, or a clean washed appearance. A gasket blown between cylinders, may show no sign of water, but depending on size of the engine, may be hard, or impossible to start. The quickest, and most sure way to find out, is a compression reading of all cylinders.


Can water get into the oil when sitting in a boat?

only if there is a serious engine problem. A boat motor is cooled by lake water instead of a radiator and coolant system. The lake water is pumped into the motor's cooling tubes and pumped out through the exhaust. The only way I can see that there would be water in the oil is if the motor has a blown head gasket or a cracked valve.


How do you put head gasket in boat engine?

To install a head gasket in a boat engine, first ensure the engine is cool and disconnect the battery. Remove the cylinder head by unscrewing the bolts in the correct sequence to avoid warping. Clean the surfaces thoroughly, place the new gasket on the engine block, and then carefully reattach the cylinder head, tightening the bolts to the manufacturer’s specified torque in the proper sequence. Finally, reassemble any other components and reconnect the battery before testing the engine.


What does it cost and whats involved in replacing a gasket in the engine block?

I take it you mean the head gasket. Head gaskets are pretty cheap, but the labor is high. If it is a V 6 or V8 you may have to do only one side. A lot would depend on what engine you have. I don't know if it is a car, boat or what, so it is hard to say what all is involved. You do have to remove the head from the engine to install a head gasket.


Who in the Nashville are can repair boats?

If you go to www.theyellowpages.co and search for boat maintenance and repair you will find contact information for a number of boat repair shops in your area.


More about ss empire tern?

The s.s. empire tern was a boat that phillip and his mother were on in''The Cay'' that later got blown up...


Which of the following is required to have a backfire flame arrestor A speed boat with an out board engine a boat with a propane stove for cooking a boat with a gassoline inboard engine or a boat equ?

A boat with a gasoline inboard engine


How do you find the fuel hose line needed for your 1992 mariner 9.9hp outboard?

Probably at any boat motor repair shop, small engine repair shop, or maybe even at a major auto parts store.


What does a boat with an engine called?

power boat