I would say 50 H.P.
around 375 pounds.
how to take cover off 1979 mercury boat motor
150/193
The dry weight of the 1991 model, Johnson 150hp outboard is 384 lbs.
The average weight of a 150 HP Mercury outboard motor typically ranges from about 350 to 400 pounds (159 to 181 kg), depending on the specific model and features. Factors such as the type of engine (two-stroke vs. four-stroke) and additional components can also influence the weight. It's always best to check the manufacturer's specifications for the exact model in question.
Stator is bad witch is under your fly wheel or bad switch board that send power to spark plugs
The 1992 model, 150 Evinrude SF has a dry weight of 372 lbs.
If by "pee" you mean the motor is shooting water out of the water outlet, then yes it should do this--the water pump turns when the engine does.
If not using the oil injection system, a 150hp Mercury outboard would require a 50:1 ratio. This is roughly, one pint of 2 cycle oil, to six gallons of fuel.
If not using the OEM oil injection system, the fuel to oil ratio for the Mercury 150hp XR4, is 50:1. This is roughly, one pint of 2 cycle oil, to six gallons of fuel.
A Z24 is normally luxury parts with a bigger 2.4L engine. Normally running around 150HP and 155lb torque. with normal cavaliers running to 130-140HP. Basically the Z24 is the sportier model of the cavaliers.
easy