0
What else can I help you with?
What is the oil to fuel ratio for a 1985 mercury outboard boat motor?
Merc's use a 50:1 mix
What octane gas should you use in 1996 mercury boat motor?
For a 1996 Mercury boat motor, it's generally recommended to use regular unleaded gasoline with an octane rating of 87. However, if the engine is high-performance or shows signs of knocking, you may consider using mid-grade fuel with an octane rating of 89. Always consult the owner's manual for specific recommendations tailored to your motor model.
What is the fuel mixture for Mercury 3.9hp outboard motor 1964?
Mercury outboards prior to 1966 use a 24:1 fuel to oil ratio.
Do you use leaded or unleaded fuel on mercury 115 boat engine?
You should use unleaded fuel in a Mercury 115 boat engine. Most modern outboard engines, including Mercury models, are designed to run on unleaded gasoline to prevent engine damage and ensure optimal performance. Always check the owner's manual for specific fuel recommendations for your particular engine model.
What is fuel mixture for 1989 mercury 125 hp outboard boat motor?
The 1989 Mercury 125 hp outboard motor typically requires a fuel mixture of 50:1 for optimal performance. This means mixing 2.5 ounces of two-stroke outboard oil with one gallon of gasoline. Always use high-quality marine-grade oil and fresh fuel to ensure the longevity and efficiency of the engine. It's advisable to consult the owner's manual for specific recommendations and any updates.
Can you use flex fuel in a 2003 mercury mountaineer?
Some were flex, but only if you have the flex fuel motor, There will be a sticker under hood and gas door that say E85 approved.
What is the fuel mixture for Johnson seahorse 5.5 hp outboard boat motor?
It depends what year. The older ones use 24:1.
What octane fuel does a mercury 40 hp out board motor use?
A Mercury 40 hp outboard motor typically requires a minimum of 87 octane fuel, which is regular unleaded gasoline. For optimal performance and to prevent knocking, using fuel with an octane rating of 89 or higher is often recommended, especially under heavy loads or in warmer temperatures. Always refer to the owner's manual for specific fuel recommendations for your model.
What should you do of the motor on your boat catches fire?
If the motor on your boat catches fire, immediately cut off the fuel supply to prevent further flames. Use a fire extinguisher rated for marine use to extinguish the fire, aiming at the base of the flames. If the fire cannot be controlled, evacuate everyone from the boat and call for emergency assistance. Always prioritize safety and wear a life jacket if necessary.
What is the proper oil to fuel ratio for a 1976 Mercury 115 HP Also what type of oil should you use SAE 30 Mercury oil or two-stroke oil?
The 1976 model, 115 hp Mercury outboard, requires a 50:1 fuel to 2 cycle oil ratio. This is roughly one pint of 2 cycle oil, to six gallons of fuel. The use of 4 stroke type motor oil is not recommended, nor intended, for fuel / oil mix.
What fuel do motor cycles use?
fossil
What is Fuel oil mix ratio 5 hp mercury 2 stroke?
We have one on our boat and use 50:1 mix. Seems to be right. I guess we'll find out if it seizes up.
