answersLogoWhite

0

What else can I help you with?

Related Questions

How to Keep Your Water Heater Clean?

By Andreina Urdaneta A clean water heater will heat and maintain water better and last longer. Once a year, flush your water heater, and in extreme hard water areas, at least twice a year. If you feel up to the challenge, here are some tips to help you in a basic cleaning. 1 Turn the water heater and the cold water supply to the water heater off. 2 Hook a high-quality garden hose to the drain valve, and place the other end in an area where hot water will not cause damage. 5. Open the drain valve. 6. Disconnect the cold water pipe on the top of the water heater. This step will let air into the water heater so it will drain. When the water heater is empty, close the drain. 8. Pour tile cleaner into the cold water, leave for a couple of hours and drain the detergent out of the tank. 10. Reconnect the cold water supply to the water heater. Open the cold water valve and let the water heater flush for a couple minutes. 12. Close the drain valve and open the hot water faucet nearest to the tank, and let the water heater fill. 13. When water starts to come out of that faucet, reopen the drain and let the water heater continue to rinse. After all the air is out of the water heater, turn it back on. Take care of your water heater, and it will take care of you. If you keep ignoring the task, your water heater may just leave you in the cold.


How long does it take to heat a water heater?

The time it takes to heat a water heater can vary depending on the size and type of the heater. On average, it can take anywhere from 30 minutes to a few hours for a water heater to heat up completely.


Can a pocket hose drain a water heater?

Yes, a pocket hose can be used to drain a water heater, provided it has the appropriate fittings to connect to the drain valve of the heater. However, the flow rate may be slower compared to a standard garden hose, depending on the diameter and length of the pocket hose. It's essential to ensure that the hose is rated for hot water and can handle the temperature without damage. Always take necessary safety precautions when draining a water heater.


How long does it take for the water heater to heat up?

The time it takes for a water heater to heat up can vary depending on the type and size of the heater. On average, it can take anywhere from 30 minutes to 1 hour for a water heater to heat up a full tank of water.


How much time does it take to drain a 75 gallon water heater and how much time does it take to fill it back up?

About ten and four minutes


How long does it take to heat up a water heater?

The time it takes to heat up a water heater can vary depending on the size and type of the heater. On average, it can take anywhere from 30 minutes to 1 hour for a water heater to heat up completely.


How long to drain a hot water heater?

Draining a hot water heater typically takes about 30 minutes to an hour, depending on the tank size and the flow rate of the water being drained. To expedite the process, ensure the water heater is turned off and the cold water supply is shut off before opening the drain valve. The actual draining time will vary based on the amount of sediment buildup in the tank and the length of the hose used to direct the water. Always take necessary safety precautions when working with hot water.


How long does it take a car battery to drain if the alternator is bad?

3 or 4 hours if you dont use heater or radio or lites


How long does it take for a water heater to heat water?

The time it takes for a water heater to heat water can vary depending on the type and size of the heater. On average, it typically takes about 1-2 hours for a water heater to heat up a full tank of water.


How long does it take for a heater to heat up the water in your tank?

Less than 3 minutes! It shouldn't take that long


How long does a water heater typically take to heat up?

A water heater typically takes about 1 to 2 hours to heat up a full tank of water.


How long does a water heater take to heat up?

The time it takes for a water heater to heat up can vary depending on the size and type of the heater, but typically it takes about 1 to 2 hours for a water heater to heat up a full tank of water.