The labor required to spread a ton of gravel depends on several factors, including the area size, the method of spreading, and the terrain conditions. Typically, a skilled worker can spread about 1 ton of gravel in 1 to 2 hours using a shovel and rake, while mechanical methods like a skid steer or tractor can significantly reduce this time to around 20-30 minutes. Additionally, uneven terrain or obstacles may increase the labor time. Planning and preparation can also affect overall efficiency.
24.7675 ton 1 US (short) ton = 2000 lb 1 UK (long) ton = 2240 lb 1 tonne (metric) = 2204.6 lb
tons, a plural but one ton of rocks
I'm not an air conditioning expert, but I would expect that the compressor will run a lot more than it needs to. A 2 ton coil will not cool as much air as a larger capacity 3 ton coil. Experts?
4,000 Lbs 2,000 LBS/ ton
There are 2000 pounds in a ton, so one ton of gravel is equivalent to 2000 pounds.
Knowing that 1 cubic foot is pretty much equal to 100 pounds or 0.05 ton, 1 ton of gravel is around 20 cubic feet.
2000 lbs
I need to know how thick the layer of gravel is meant to be.
1 ton = 2000 pounds. A ton is a measurement of weight, so 1 ton of anything is always 2000 pounds. 1 ton of gravel = 2000 pounds, 1 ton of feathers = 2000 pounds
1 ton of gravel typically weighs about 2000 pounds.
The price per ton for gravel in Missouri will depend on where you are and what kind of gravel you're buying. You can get it for as little as $4.25 a ton for ordinary gravel up to $32.00 a ton for specialty gravels.
About 1/4 ton.
12 ton
About one half
In the state of Florida, one ton of gravel will cost you about $9.61. However, it will vary depending on the store in which you buy the gravel.
That's not enough information. You need to know the width of the trench, and how much volume 1 ton of gravel is equivalent to.