0
What else can I help you with?
Does liquid ammonia damage all compressors?
No.Screw compressors can handle a little bit of liquid,because of internal slide valve.Reciprocating compressors can not handle liquid.
What are some safety precautions for corrosive?
Well, corrosive means that it will burn through material. Your best bet would be to wear protective clothing and handle the substance with care.
What is the inlet pressure of a condensate tank?
It can be at any pressure less than the main steam pressure. I've operated steam systems with condensate tanks at widely varying pressures. The pressure a condensate tank, (which condenses some steam, but typically takes returns from steam traps) is wholly dependent on the system is installed in. Some heating system condensate tanks are designed to handle no more than 30 psig (minimum design requirement) yet take condensate at 1 or 2 psi from the steam traps. Other high pressure production lines operating at 50 - 100 psig could discharge to a tank at 50 - 100 psi, though the actual pressure would be reduced by the length of pipe transferring it to the tank. And the highest pressure I've operated a condensate system at was 600 psig, the steam system drew the steam for process from an extraction stage on the turbine at nominally 600 psi, though at low loads it was typically a much lower pressure.
How would you handle corrosive with it sign on it's container?
I would wear gloves and eye protection, such as safety goggles or face shield and I would also keep corrosive substances away from living tissues, wood and metal.
What are the pros and cons of using petroleum coke?
Petroleum coke is cheaper than coal; therefore, the economics of the process can be improved by substituting coke for coal. Petroleum coke cannot simply be substituted 100% for coal due to hardness issues and combustibility issues. Usually an existing plant may use petroleum coke as a 20% substitute for existing coal use. This results in problems. Now your workers have to handle both coal and coke separately and ensure the intended blend ratio is maintained in order to maintain operability. There are specific materials handling issues than can make the discount less advantageous than is immediately apparent. Equipment such as cranes, conveyors, and crushers may frequently break down and may need to be spared in order to keep the process running. Also if the source of the petroleum coke is not locally available supply disruptions may occur based on price changes in petroleum coke (or in bunker fuel or marine diesel oil (MDO) which is used by the ships that carry coke). For instance shipping petroleum coke from the United States to China is only economical when petroleum coke is above a certain price is China. Petroleum coke may also increase the SOx (sulfur dioxide or sulfur trioxide) emissions from the plant. Options to mitigate the emissions impact include buying higher priced, lower sulfur coal and/or coke to blend into the fuel mix. This negatively affects the economics of the original planned coke substitution. In the case of a grassroots project designed to burn petroleum coke (such as a circulating fluidized boiler, (CFB) ), the economics can be much more favorable. Even in this case environmental permitting issues and petroleum coke supply issues should be evaluated before starting the project. Due to recent concerns with carbon dioxide regulations and ever more strict sulfur emissions regulations, permitting solid fuel boilers has become more difficult throughout the world; however, the economics of using petroleum coke can still pay off depending on the required payback period of the project.
What is the importance of splitting production process into different processes?
The importance of splitting production process into different processes is that it improves efficiency. The division of the processes will ensure that the relevant department will handle the area of production which it is skilled in.
What happens when you mix potassium permanganate with water and glycine?
When potassium permanganate is mixed with water and glycine, a reaction may occur in which the permanganate oxidizes the glycine. This can result in the production of manganese dioxide, water, and carbon dioxide. The specific products and reaction conditions will depend on the concentrations and proportions of the reactants. It is important to handle potassium permanganate with care as it is a strong oxidizing agent.
What is handle pruning?
From Compiler Design by Chris Armen A handle of a string is a substring that matches the rhs of a production, and whose reduction to the lhs is one step along the reversal of a rightmost derivation. The process we went through can be viewed as "handle-pruning", where we're pruning the parse tree
What happens when potassium permanganate is mixed with hydrochloric acid?
When potassium permanganate is mixed with hydrochloric acid, the potassium permanganate will react with the hydrogen ions in the hydrochloric acid to form chlorine gas, manganese dioxide, and water. This reaction is exothermic, meaning it releases heat energy. It is important to handle this reaction with caution due to the potential production of chlorine gas, which is harmful if inhaled.
How does bend to bike handle?
bike handle bending process
Why is continuous process used for ammonia and batch process used for medicine?
Continuous process is used for ammonia production due to its high demand and large volume requirements, allowing for efficient production on a large scale. On the other hand, batch process is used for medicines to allow for precise control of reaction conditions, easier customization of products, and the ability to handle multiple products simultaneously in the pharmaceutical industry.
Why does eating a banana make your stomach ache?
Your body can't handle the potassium :(
DOES potassium permanganate dissolve in acetone?
Yes, potassium permanganate is soluble in acetone. However, it is important to handle this combination with care as it can react vigorously and release heat.
Is potassium more reactive than francium?
Yes, potassium is more reactive than francium. While francium is the most reactive alkali metal, potassium is more commonly found and easier to handle due to its higher atomic number and stability.
How do you make potassium methyl siliconate?
Potassium methyl siliconate can be made by reacting methyl trichlorosilane with potassium hydroxide. The reaction typically occurs in an organic solvent under controlled conditions to produce potassium methyl siliconate as a product. It is important to handle these chemicals with caution due to their reactivity and potential hazards.
What would happen if you set fire to potassium?
When potassium is set on fire, it burns with a lilac or light purple flame, releasing heat and producing potassium oxide. The reaction is highly exothermic and can be violent if large amounts of potassium are involved. It is essential to handle potassium with extreme caution due to its reactivity with air and water.
What if a student is given a container of potassium nitrate crystals in order to determine the exact mass of the potassium nitrate using a triple beam balance he must know the?
The student must know how to properly calibrate and use the triple beam balance to accurately measure the mass of the potassium nitrate crystals. This involves zeroing the balance, adjusting the weights on the beams, and reading the measurements correctly. It is also important to handle the potassium nitrate carefully and avoid any spills or contamination during the process.
