0
What else can I help you with?
What is the usage of rundown tank in lube oil?
Holding (residence) time requirements for next unit operation. M. Felzien
Advantages of batch reactors?
1. High conversion per unit volume for one pass. 2. Flexibility of operation-same reactor can produce one product one time and a different product the next. 3. Easy to clean.
Can you put a clear epoxy over an oil concrete stain?
First you must pressure wash as best as possible. Next you need to acid wash the concrete. Finally you should be able to neutralize the acid with a vinegar and water solution. Let dry. You should prepare the whole floor this way.
Home appliances that convert chemical to heat energy?
Ah, what a delightful question! Home appliances that convert chemical energy to heat energy include stoves, ovens, and water heaters. Just like painting a happy little tree, these appliances work their magic by using fuels like gas or electricity to create the warmth and comfort we enjoy in our homes. Remember, every appliance has its own unique way of bringing joy and functionality to our daily lives.
How can i construct refractory castable?
Construction of Refractory CastableDuring the construction of refractory castable, special attention should be paid on pin welding, asphalt brushing, stirring of castable with water, making and fixing of mould, vibration and ramming of refractory castable, demoulding, sizes' and measuring points' accuracy, etc. Do construction strictly as material manufacturer and boiler works required.1. Installation of Pin and Claw NailsReinstall the pins missing for any reason and the pins in the area of heating surface composite melding junction before hydraulic pressure. Lengthen and reinstall the pins properly in coal mouth, material return mouth and upper inflection point of air duct furnace so that meets the required density of pins. Brush all the pre-buried metal parts and claw nails with asphalt paint (thickness > 1mm) or cover them with combustibles before casting.2. Dosing and Stirring of Castable & WaterThe dosing of refractory castable and water should be done strictly as the instructions of material manufacturer. The water should be clean, such as drinking water, ph 6-8. The mixer should be clean forced action mixer, and clean it for the next time using. Pay attention on the adding order of castable and water and its stirring time, adding water freely and prolonging of stirring time are forbidden. The water and refractory castable should be mixed evenly and stirred till smooth. Carry away the mixed casatble immediately after stirring, the castable poured out from stirring tank is disallowed to be poured into the tank and stirred again. Clean the tank after every construction for the next using, record the amount of water and refractory castable, and the stirring time.3. Checking Before Making TemplateCheck carefully whether the pin, hook nail and strutting part conform to the drawing, whether all the re-welding and is done and firm, whether the temporary metal parts have been cut off. Check whether the metal parts which should be brushed with asphalt paint meet the requirement, whether the casting place is clean, any other unrelated materials are forbidden to appear. For easy demoulding, a thin tier of partition (such as used oil) can be brushed in the mould. There can not be gaps between each two templates to avoid castable leaking out, so that also convenient for mould releasing. The refractory castable should be used up in 30 minutes after stirring, and should be casted to the required thickness in 1 time. Ram the castable till tight. For the too thick parts, cast tier by tier, while casting the upper tier, vibration bar can not touch the lower casted tier.
When tamilnadu calfer for boiler operater exam?
next boiler operator exam---? when will start boiler operater examination
Does fire change color because of its heat?
Yes, blue is hottest, white is next, orange is next and red is the least hot. Good LUCK!!
Where do you get the water pool in clubpenguin?
Go to the dance club and then in the right speaker, click it and then your in the boiler room. No click the next door in the boiler room. NOW YOUR IN THE POOL
Red?
rojo
When was The Fire Next Time created?
The Fire Next Time was created in 1963.
How do you calculate the evaporation rate in a closed system - especially in a boiler?
There are many factors. First of all, there is the temperature of the water. Next, the is the volume of water. Next there is the amount of pressure gradually built up in the boiler. Next you have the amount and speed at which heat is transferred to the water.
What is the function of Level indicator?
there are two water level indicators usually mounted in front of boiler to ascertain the level of water inside the boiler am explain construction and working on next page
How many pages does The Fire Next Time have?
The Fire Next Time has 128 pages.
Who wrote the book the fire next time?
James Baldwin wrote The Fire Next Time.
What is the next color after purple?
The next color after purple in the visible light spectrum is blue.
How do I use a double boiler to melt chocolate?
Melting chocolate in a double boiler is easy and will help make your desserts more delicious. The first step is to fill the bottom half of the boiler with water and set the burner to low. Next you add your chocolate into the top half of the boiler and stir until you achive the consistency you desire.
What comes out of the pot next to the sensei in cp?
Well, just steam I guess. The pots colors is suppost to represent what color belt your on, or the elements of fire, water, or snow!
