answersLogoWhite

0

A blockage in the downstream side of the pump could make this pump work harder raising the amps as the pump now has to do more work to get through the line. An upstream blockage would make the pump spin more freely lowering the amps on the pump as it will not be doing any work.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Chemical Engineering
Related Questions

What happens to the amps on a centrifugal pump if the suction is restricted?

Amp rise


How many amps are in lightning strike?

The average lightning discharge seems to be between 5,000 and 20,000 amps but have been reported to reach 200,000 amps on very rare occasions.


What do you need to know when switching amps with a cap hook up already?

Be sure you discharge cap before installing new amp.


What is the 10 hour rating of a battery?

It is the discharge rate of the battery rated in ampere hours. Yours could be any combination from 10 amps for 1 hour up to 1 amp for 10 hours. eg. 5 amps for 2 hours, 2.5 amps for 4 hours.


What amp is a handheld Dyson?

Dyson DC31 Animal handheld vacuum cleaner is about 2 amps. With suction power of 10 minutes of 38 airwatts or 6 minutes of 65 airwatts(constant)


Does an overcharge of refrigerant affect suction pressure?

In a simple system with a fixed orfice expansion device for example, an overcharge will increase suction and head pressure. Compressor amps will also increase. Overall refrigeration capacity will be reduced. lc


What charger do you need for a 24 volt battery?

The formula you are looking for is I = W/E. Amps = Watts/Volts. 300/24 = 12.5 amps. A good charger with an output of 15 amps will do the job nicely. The time that it will take to charge the battery will depend on the amp/hrs of the connected battery and the state of discharge that the battery is in when charging starts.


How many amps are in 40 volt amps?

Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.


What does 0.35897amps equals to in amps?

0.35897 amps = 0.35897 amps.


200ma in amps?

200ma is .200 amps or .2 amps


How many amps are in a 12 volt 225ah battery?

Batteries are not measured in Amps, but rather as Amps they can emit in an hour. The standard home unit for battery power is AH our Ampere Hour.At 12 volts the amps in your battery are then described in Ampere Hours or Amps per hour.From that we get that if the battery was plugged into a 12v device that drew 225 amps, your battery would run out in 1 hour.Similarly if it was connected to a device requiring 112.5 amps it would take 2 hours to run down.Wikipedia has stated that this is an approximation, that at really high currents (measured in how many Amps you are currently using) the battery life is shorter than expected and that the Ampere hour is generally supposed to consider a 20 hour cycle of discharge(therefore meaning lower amps per hour)This brings the battery back to it's "normal" drainage pattern.@ 12v and 11.25A your battery would take 20 hours to drain.


What is the difference between 5 amps and 12 amps?

7 amps