This depends on the temperature but you can take a look at http://www.engineeringtoolbox.com/ethylene-glycol-d_146.html T = 40°F -> approx. 44.4 vol% T = 80°F -> approx. 52.3 vol% T = 120°F -> approx. 63 vol% T = 160°F -> approx. 78 vol% T = 200°F -> approx. 95.3 vol% This depends on the temperature but you can take a look at http://www.engineeringtoolbox.com/ethylene-glycol-d_146.html T = 40°F -> approx. 44.4 vol% T = 80°F -> approx. 52.3 vol% T = 120°F -> approx. 63 vol% T = 160°F -> approx. 78 vol% T = 200°F -> approx. 95.3 vol%
The ratio of mass to volume is called density.
- The specific weight is the weight of a known volume of material at a given temperature and pressure; the unit of measure is kN/m3. - But if you think to relative density: Relative density (specific gravity) is the ratio between the density of the material to be tested and the density of water, at a given temperature and pressure; consequently no unit of measure for this ratio.
Because density is a "ratio".
the mixture of nitric acid and sulfuric acid in the ratio of 1:2.
Density is the ratio of mass to volume of a substance. d = rho = m / V Density generally depends upon the following : ( 1 ) Identity of the substance ( 2 ) Temperature ( 3 ) Pressure for gases
Any Ethylene Glycol based coolant mixed in a 1:1 ratio with water. Prediluted means it is already in the correct ratio.
Ethylene glycol and water can be mixed in any ratio because of their compatibility and makeup. It is primarily used to prevent water from freezing and increase its boiling point for automobiles.
ethylene glycol, I don't believe the brand matters, but there may be manufacturers specifications for the water to antifreeze ratio
Density is the ratio of mass to volume.
The density of a salt water solution compared against the densities of "pure" water and salt provides an approximate value of the ratio of water to salt in the mixture.
Density is the ratio of the mass of a substance to the volume of the substance.
DENSITY : density is the ratio of mass and volume of the substance density=mass/volume RELATIVE DENSITY : It is the ratio of density of a substance to the density of water
DENSITY : density is the ratio of mass and volume of the substance density=mass/volume RELATIVE DENSITY : It is the ratio of density of a substance to the density of water
The answer depends on the mixture.
No, they are very different properties. But the density depends on concentration for solutions. Density is the ratio mass/volume. Concentration is the amount of an element (or compound) in a given mass (or volume) of an another compound or mixture.
An alloy is a mixture of Metals. A mixture is a combination of elements in an unfixed ratio. A compound is a mixture of elements in a fixed ratio.
No the Ratio of a mixture are not exact, one mixture might have more substance than the other but it is still a mixture.