Smelting
The acetic acid removes the oxide on the metal, brightening it. The process is used, in a much more sophisticated and controlled manner to clean metal industrially, prior to plating etc; and is actually called "pickling"!
abrasive, removes small amount from surface
The refining process is the chemical process by which impurities are removed from precious metal. The chemical process involves dissolving the target metal and then precipitating it back out.
The process is usually referred to as pickling, or descaling.
Carbon, usually in impure form such as coal or coke, is often used to remove oxygen from metal ores.
Smelting removes unwanted elements from metal.
Bleach works by oxidizing the stain it's treating. "Oxidize" means it removes an electron from it, so the bleach removes an electron from the stain. Rust is also formed by oxidation, the removal of an electron from a metal. So if bleach can remove an electron from a laundry stain, it can also remove one from a metal.
Before soaking metal jewerlry in WD40 to remove adhesive, test on a small area. This will prevent you from ruining the piece if the WD40 removes or damages the finish.
The acetic acid removes the oxide on the metal, brightening it. The process is used, in a much more sophisticated and controlled manner to clean metal industrially, prior to plating etc; and is actually called "pickling"!
Miners in Australia look for things like Uranium,Metal,Lithium and all that some also look for gold.
abrasive, removes small amount from surface
Exchanged traded funds are the most reliable place for Gold Miners ETFs. On the exchanges one can find ETFs specific to pure gold miners, gold and other precious metal miners, gold explorers as well as variations such as junior miners.
Fuses have metal ends that can cause a shock if they are touched while removing them. Some boxes where fuses are found have a lever like device that removes power from the fuse when in off position. This is the safest way to remove. Don't bring your body in contact with any metal pieces inside fuse box.
Paint stripper. Works for both metal and wood for a car sand otherwise surface contaminants will take longer to remove than sanding painting combined.
Because Gold is found underground. It is a natural occurring metal.
Gouging is a process where an arc is established between a carbon rod and the metal to be gouged and the metal is melted. A steady flow of air is blown into that molten pool removing the molten metal. Increasing the amperage or slowing down the travel speed allows a deeper gouge. Speeding up the travel speed or decreasing the amperage removes less metal. Copper coated carbon rods are used and are available in different diameters and shapes.
A process of taking an oreand, throughheating and adding other substances to remove other elements, gives you a purer sample of the metal.