yes you can and the stain can change colors if there is a juice stain for example thats red and a grass stain the stain color could change
To remove a stain from a limestone counter top, mix a solution of warm water and mild dish soap. Using a soft cloth or sponge, gently scrub the stained area. Rinse with clean water and dry thoroughly. For stubborn stains, you can try a poultice made of baking soda and hydrogen peroxide to lift the stain.
Yes, marble table tops can stain if spills are not promptly cleaned up. Marble is a porous stone that can absorb liquids and oils, leading to discoloration. It's important to seal the marble surface regularly to help prevent staining.
Removing stains depends on the type of stain. I encourage you to search for instructions on removing the specific type of stain, but the following instructions should do for an unknown stain. Start by blotting up or scrapping off as much of the stain as possible. Then rinse the stain in cool water and pretreat it. Wash the shirt on a cool water cycle.
Mix a solution of warm water and mild dish soap. Use a soft cloth to gently scrub the soap stain on the granite top. Rinse the area thoroughly with clean water and dry it with a soft cloth. Repeat as needed until the stain is removed.
To remove semen stains from bedsheets, start by blotting up as much of the stain as possible with a clean cloth. Then, rinse the area with cold water to help lift the stain. Next, apply a stain remover or a mixture of laundry detergent and water, and wash the sheets according to the care instructions.
Yes you can, just clean the old stain with steel wool or fine sandpaper before you do.
Yes, you can apply a new stain on top of an existing stain as long as the existing stain is fully dry and the surface is properly prepared.
No, you cannot stain on top of polyurethane for a new finish. Stain needs to penetrate the wood, and polyurethane creates a barrier that prevents this.
To effectively repair wood stain damage on furniture, start by sanding the damaged area to remove the old stain. Then, apply a matching wood stain and let it dry completely. Finally, finish with a protective top coat to seal and protect the repaired area.
You re-stain with a darker stain. Good luck.
If the stain is not too old, vinegar will lift most of it out.
Yes, gel stain typically requires a top coat for proper finishing to protect the surface and enhance durability.
with a lot of windex..... (.__.')
No, you cannot put stain on top of polyurethane for a new finish. Stain needs to penetrate the wood, and polyurethane creates a barrier that prevents this. If you want to change the color, you will need to remove the polyurethane first.
I agree with Charles. I would also sand the piece of wood with the stain a bit then apply the darker stain.
Yes, but only if the stain is a few years old and really dry. You have to wash the stain thoroughly to remove the chalked pigments and then prime it to seal the checks in the wood. One disadvantage of stain is that it will not keep the wood from checking as it dries. Either a latex of alkyd primer will work well. You can then paint it with your latex top coat.
TAKE OFF YOUR COVER ON AN OLD COUCH CUSION" USALLY ITS A SPONGE MATERIAL" USE THE SPONGE PLACE IT ON TOP OF THE OIL STAIN &