==
It is better to use concentrated HCl to adjust pH as it is more efficient and allows for better control of the pH level compared to dilute 1N HCl. Additionally, concentrated HCl may require less volume to achieve the desired pH level.
Ethereal HCl, or hydrochloric acid in diethyl ether, can be prepared by adding gaseous hydrogen chloride to diethyl ether under controlled conditions. This process requires careful handling due to the reactive nature of hydrogen chloride gas and the potential for formation of explosive peroxides in diethyl ether. It is recommended to be carried out by experienced individuals in a well-ventilated fume hood.
Use the eq'n moles = [conc] X vol(mL) / 1000 Algebraically rearragne [conc] = moles X 1000 / vol(mL) [conc] = 0.002 X 1000 / 2000 mL [conc] = 0.002 X 1/2 [conc] = 0.001 mol L^-1 or 0.001 M
There is only one concentration each of H and OH in 250ml. But the volume has nothing to do with it. The pH is the negative (common) logarithm of the concentration of (dissociated) hydrogen-ions (H+) in an aqueous solution. pH = - log Conc.(H+) with Conc.(H+) in [mol/L] Conc.(H+) = 10-pH pOH = 14 - pH The number of atoms and molecules can be calculated using the Avogadro constant 6,02214179(30) *1023 mol−1 now you can find out.
To prepare 1 M hydrochloric acid (HCl) solution, you usually need to dilute concentrated HCl solution (~35-37% HCl) with water in a specific ratio. The specific volume of concentrated HCl needed depends on its concentration and the final volume of the 1 M solution you want to make. In this case, 85 ml of concentrated HCl is likely to be the volume needed to make 1 L of 1 M HCl solution.
It is better to use concentrated HCl to adjust pH as it is more efficient and allows for better control of the pH level compared to dilute 1N HCl. Additionally, concentrated HCl may require less volume to achieve the desired pH level.
dilute 1.7 ml of Conc. HCl to 1000 ml with water
Ethereal HCl, or hydrochloric acid in diethyl ether, can be prepared by adding gaseous hydrogen chloride to diethyl ether under controlled conditions. This process requires careful handling due to the reactive nature of hydrogen chloride gas and the potential for formation of explosive peroxides in diethyl ether. It is recommended to be carried out by experienced individuals in a well-ventilated fume hood.
Use the eq'n moles = [conc] X vol(mL) / 1000 Algebraically rearragne [conc] = moles X 1000 / vol(mL) [conc] = 0.002 X 1000 / 2000 mL [conc] = 0.002 X 1/2 [conc] = 0.001 mol L^-1 or 0.001 M
Sulphur dioxide + ethylene --> mustard gas orthiodiglycol + a chlorinating agent (conc. HCl or some phosphorus trichloride) --> mustard gas.
There is only one concentration each of H and OH in 250ml. But the volume has nothing to do with it. The pH is the negative (common) logarithm of the concentration of (dissociated) hydrogen-ions (H+) in an aqueous solution. pH = - log Conc.(H+) with Conc.(H+) in [mol/L] Conc.(H+) = 10-pH pOH = 14 - pH The number of atoms and molecules can be calculated using the Avogadro constant 6,02214179(30) *1023 mol−1 now you can find out.
To prepare 1 M hydrochloric acid (HCl) solution, you usually need to dilute concentrated HCl solution (~35-37% HCl) with water in a specific ratio. The specific volume of concentrated HCl needed depends on its concentration and the final volume of the 1 M solution you want to make. In this case, 85 ml of concentrated HCl is likely to be the volume needed to make 1 L of 1 M HCl solution.
Ah, preparing a 0.02 M solution of HCl is a wonderful journey. Simply measure out the correct amount of hydrochloric acid and dilute it with water until you reach the desired concentration. Remember to handle chemicals with care and always wear appropriate safety gear. Happy experimenting, my friend!
Aqua regia or royal water (mixture of conc. HCl and conc. HNO3 in the ratio of 3:1 by volume) 3HCl + HNO3 = NoCl+2 H2O + Cl . NoCl= nitrosyl chloride Cl= nascent chlorine
To make 1 liter of 0.05 M HCl solution, you would need to dilute concentrated HCl. The concentration of the concentrated HCl would depend on its specific concentration, but you would typically need around 100 mL of concentrated HCl, assuming it is a standard 12 M concentration, to make the desired dilution.
It is safe to swim after adding hydrochloric acid to swimming pool. but in a small quantity like for a pool just a liter of dil. HCl (0.1N) . But if you use conc. HCl , then there may be chances of skin burn or blisters etc. to the skin. It mainly depends on concentration. and amount of water is added. DO NOT ADD conc. HCL to the water. There will the chances of bursting.
hhsggsqq