0
What else can I help you with?
Does fluoxetine hcl 10 mg get you high?
Fluoxetine HCl (Prozac) is an antidepressant medication that is used to treat conditions like depression, anxiety, and obsessive-compulsive disorder. It is not used for recreational purposes, and taking it in higher doses than prescribed can be dangerous and increase the risk of side effects without producing any euphoric or "high" effects. It is important to only take medications as prescribed by a healthcare professional.
How do you get 0.1M from 1M HCL?
To make a 0.1M solution from a 1M HCL solution, you would dilute the 1M HCL with 10 parts of water (or whatever solvent you are using). For example, mix 1 mL of 1M HCL with 9 mL of water to obtain a 0.1M HCL solution.
10 grams per liter HCl solution preparation?
To prepare a 10 grams per liter solution of hydrochloric acid (HCl), you would weigh out 10 grams of HCl and dissolve it in enough water to make 1 liter of solution. Make sure to wear appropriate protective gear and work in a well-ventilated area when handling HCl as it is a corrosive chemical.
How do you make 5mM HCl?
To make a 5mM solution of HCl, you would need to dilute concentrated HCl (usually in the range of 10-12M) with water. The exact dilution volume will depend on the concentration of the concentrated HCl solution you have. It's crucial to wear appropriate personal protective equipment and handle concentrated HCl with care due to its corrosive nature.
How can you make 500ml of 0.8M HCl solution from 10M HCl and water?
Amount of HCl is 500cm^3 of .8M HCl = .8 x 500/1000 = 0.4 mol. Volume of 10M acid to give 0.4 mol = .4/10 = 0.04dm^3 = 40cm^3 Add 500 - 40 = 460 cm^3 of water. Caution : 10M HCl is highly corrosive and should be handled with care.
Does fluoxetine hcl 10 mg get you high?
Fluoxetine HCl (Prozac) is an antidepressant medication that is used to treat conditions like depression, anxiety, and obsessive-compulsive disorder. It is not used for recreational purposes, and taking it in higher doses than prescribed can be dangerous and increase the risk of side effects without producing any euphoric or "high" effects. It is important to only take medications as prescribed by a healthcare professional.
How do you get 0.1M from 1M HCL?
To make a 0.1M solution from a 1M HCL solution, you would dilute the 1M HCL with 10 parts of water (or whatever solvent you are using). For example, mix 1 mL of 1M HCL with 9 mL of water to obtain a 0.1M HCL solution.
How do you make 5mM HCl?
To make a 5mM solution of HCl, you would need to dilute concentrated HCl (usually in the range of 10-12M) with water. The exact dilution volume will depend on the concentration of the concentrated HCl solution you have. It's crucial to wear appropriate personal protective equipment and handle concentrated HCl with care due to its corrosive nature.
10 grams per liter HCl solution preparation?
To prepare a 10 grams per liter solution of hydrochloric acid (HCl), you would weigh out 10 grams of HCl and dissolve it in enough water to make 1 liter of solution. Make sure to wear appropriate protective gear and work in a well-ventilated area when handling HCl as it is a corrosive chemical.
How can you make 500ml of 0.8M HCl solution from 10M HCl and water?
Amount of HCl is 500cm^3 of .8M HCl = .8 x 500/1000 = 0.4 mol. Volume of 10M acid to give 0.4 mol = .4/10 = 0.04dm^3 = 40cm^3 Add 500 - 40 = 460 cm^3 of water. Caution : 10M HCl is highly corrosive and should be handled with care.
What is N10 HCL and how will you prepare it?
N10 HCl would be 10 M HCl. You might mean N/10 which would be 0.1 M. (N or normal is an old-fashioned way to define chemical concentrations. Most chemists prefer M or molar concentrations.) Just take some higher-concentration HCl and dilute it to get the desired concentration. Use the dilution formula C1V1 = C2V2 to figure out how much high-concentration HCl to use for the volume of dilute HCl you want to make. If anything here doesn't make perfect sense, you probably shouldn't be working unsupervised with chemicals, and if you don't know what HCl is then you definitely shouldn't do whatever it is you are trying to do. 10 M HCl is a caustic liquid that gives off caustic vapors so wear goggles and be careful with it.
How do you prepare 10 M HCL from 37 percent HCL?
37% HCl = { [ 37 (gHCl) / 100 (g sol'n) ] / 36.46 (gHCl/molHCl) } * 1,18 (g sol'n/mL sol'n) * 1000 (mL/L) = about 12 M HClTo prepare V Litres of 10M sol'n you should dilute [10*V]/12 Litre of 37% HCl solution to the total volume of V. Be very carefull with this addition of water.
What is the molariy of concentrated HCl?
Concentrated HCl is typically 36.5% industrially. It is thus almost exactly 10 Molar.
Is pH 2.0 HCl the same with 0.1 M HCl?
No, pH 2.0 HCl refers to the acidity level of the solution, while 0.1 M HCl refers to the molarity or concentration of the hydrochloric acid. The two terms describe different properties of the solution.
How much water is needed to dilute 10 L of 3.0 N HCl solution to 0.2 N HCl solution?
To dilute a 3.0 N HCl solution to 0.2 N, you would need to dilute it 15 times (3.0 N / 0.2 N = 15). So, for 10 L of 3.0 N HCl, you would need to add 140 L of water to achieve a 0.2 N HCl solution (10 L * 15 = 150 L total, subtracting the original 10 L of HCl).
How do you convert 0.1 N HCl to 0.01 N HCl?
To convert 0.1 N HCl to 0.01 N HCl, you can perform a dilution. For example, mix 10 mL of the 0.1 N HCl solution with 90 mL of distilled water to achieve a total volume of 100 mL, resulting in a 0.01 N HCl solution. The dilution factor here is 10, as you are reducing the concentration by a factor of ten.
How many moles of HCl are on 10 grams of substance?
To find the number of moles, you need to divide the given mass (10 grams) by the molar mass of HCl (36.46 g/mol). This will give you approximately 0.274 moles of HCl.
