0
First you want to get the iron filings out. You do this with a magnet.
Next, put the sand-salt mixture in water. Stir well to dissolve the salt, then pour off the water. (If you really want to be slick about it, rinse the sand in plain water.)
Then put the salt water in a shallow dish and let it evaporate.
What else can I help you with?
How would you separate iron filings and aluminum filing?
One way to separate iron filings and aluminum filings is by using a magnet. Since iron is magnetic but aluminum is not, you can use a magnet to attract the iron filings and separate them from the aluminum filings easily. Simply pass the magnet over the mixture, and the iron filings will be attracted to the magnet, allowing you to separate them from the aluminum filings effectively.
How do you separate iron and copper filings?
One way to separate iron and copper filings is by using a magnet. Since iron is magnetic, you can use a magnet to attract and separate the iron filings from the copper filings, which are not magnetic. Alternatively, you can dissolve the mixture in a solvent, filter out the copper filings, and then evaporate the solvent to retrieve the iron filings.
Separate iron filings and aluminum filings?
Aluminum and iron can be differentiated because iron is magnetic and aluminum is not. To separate them, expose the filings to a magnetic source and the iron will separate.
How do you separate table salt aluminum filings iron filing?
Use a magnet to remove the iron filings. The add water to dissolve the salt, and the aluminum filings will settle to the bottom of the container. Pour that salt water into a pan, heat it and evaporate the water, leaving the salt in the pan.
How do you separate iron filing and wood chip?
You can separate iron filings and wood chips using a magnet. The iron filings will be attracted to the magnet, allowing you to carefully separate them from the wood chips. Alternatively, you can use a sieve to sieve out the larger wood chips from the smaller iron filings.
What technique will use to separate ashes and iron filings with water?
separate iron filings AND ash from water by filtration or evaporation then, if required, separate iron filings from ash by using a magnetic field,
How would you separate iron filings and aluminum filing?
One way to separate iron filings and aluminum filings is by using a magnet. Since iron is magnetic but aluminum is not, you can use a magnet to attract the iron filings and separate them from the aluminum filings easily. Simply pass the magnet over the mixture, and the iron filings will be attracted to the magnet, allowing you to separate them from the aluminum filings effectively.
Can you separate salt from iron filings by using a bigger magnet?
U can separate salt and iron filings from each other by using a bigger magnet . There are other ways too . You can also put both of the mixture in a cup of water and watch as the salt evaporate or disappear . But the iron filings will come to the top . Or spreading the mixture on a table and using a magnet to separate them .
How do you separate iron and copper filings?
One way to separate iron and copper filings is by using a magnet. Since iron is magnetic, you can use a magnet to attract and separate the iron filings from the copper filings, which are not magnetic. Alternatively, you can dissolve the mixture in a solvent, filter out the copper filings, and then evaporate the solvent to retrieve the iron filings.
Separate iron filings and aluminum filings?
Aluminum and iron can be differentiated because iron is magnetic and aluminum is not. To separate them, expose the filings to a magnetic source and the iron will separate.
How would you separate copper strands and iron filings?
One way to separate copper strands and iron filings is by using a magnet. Copper is not magnetic but iron is, so you can use the magnet to attract and separate the iron filings from the copper strands. Alternatively, you could also use the difference in density between copper and iron to physically separate them using techniques like flotation or panning.
Can you separate sugar from water using decantation?
No. You can separate sugar from water by evaporation.
How do you separate table salt aluminum filings iron filing?
Use a magnet to remove the iron filings. The add water to dissolve the salt, and the aluminum filings will settle to the bottom of the container. Pour that salt water into a pan, heat it and evaporate the water, leaving the salt in the pan.
How do you separate iron filing and wood chip?
You can separate iron filings and wood chips using a magnet. The iron filings will be attracted to the magnet, allowing you to carefully separate them from the wood chips. Alternatively, you can use a sieve to sieve out the larger wood chips from the smaller iron filings.
How will you separate the components of a mixtures containing sawdust sugar and iron filings?
You can separate the components of the mixture by using a magnet to separate the iron filings from the sawdust and sugar. You can then use a sieve to separate the sawdust from the sugar based on particle size differences.
How do you separate a mixture of water and sulphur?
By filtration using for ex. filtering paper.
Explain how you can use physical properties to separate filings from sawdust?
If they are iron filings, you can use the property of magnetism to remove the iron filings using a magnet. You will need to rinse the iron filings with water after you remove them with the magnet in order to completely remove the sawdust from them.
