Using a thick copper wire as a fuse is not recommended because copper wire has low resistance and will not effectively limit the current flow in case of an overload. This can lead to damage of the circuit or equipment and potentially cause a fire hazard due to excessive current passing through the wire. It's important to use the appropriate fuse rated for the circuit to ensure safety.
No, copper does not contain lead. Copper is a separate metal from lead and is often used for its electrical conductivity and corrosion resistance. Lead is a toxic heavy metal that is not typically found in pure copper.
A redox reaction will occur, with copper displacing lead from the lead nitrate solution to form copper nitrate and lead. The copper will turn into a reddish-brown color due to the formation of copper ions in the solution.
Copper is more conductive than lead. Copper has a higher electrical conductivity, making it a common material used in electrical wiring and electrical components. Lead has lower electrical conductivity compared to copper.
When copper sulfate reacts with lead, a displacement reaction occurs where lead displaces copper from copper sulfate solution. This reaction results in the formation of lead sulfate and copper metal as products. The balanced chemical equation for this reaction is: Pb(s) + CuSO4(aq) → Cu(s) + PbSO4(s).
tin lead alloybasically tin lead allows are used . but other metals which have low melting point and appropriate resistivity can be used
If a thick copper wire is used in a fuse then by definition of a fuse this device would no longer be defined as a fuse. A fuse in a circuit is used to protect the conductors feeding the load of that circuit. The circuit, if using a thick copper wire in a fuse, would then be considered as a non fused circuit.
lead, copper is a metal therefore it is harder
copper and tin
Using a thick copper wire as a fuse is not recommended because copper wire has low resistance and will not effectively limit the current flow in case of an overload. This can lead to damage of the circuit or equipment and potentially cause a fire hazard due to excessive current passing through the wire. It's important to use the appropriate fuse rated for the circuit to ensure safety.
No, copper does not contain lead. Copper is a separate metal from lead and is often used for its electrical conductivity and corrosion resistance. Lead is a toxic heavy metal that is not typically found in pure copper.
When lead is added to copper sulfate solution, a displacement reaction occurs where lead displaces copper from the solution to form lead sulfate and copper metal. This reaction is driven by the relative reactivity of the metals, with lead being more reactive than copper. The solid lead sulfate formed can be observed as a precipitate in the solution.
A redox reaction will occur, with copper displacing lead from the lead nitrate solution to form copper nitrate and lead. The copper will turn into a reddish-brown color due to the formation of copper ions in the solution.
copper and tin
Copper is more conductive than lead. Copper has a higher electrical conductivity, making it a common material used in electrical wiring and electrical components. Lead has lower electrical conductivity compared to copper.
No because Cu is below Pb in the electrochemical series
yes very safe.add. Fuse wire is usually made of tin-plated copper. The fuse wire may well get warm in service, and a bare copper wire will gradually oxidize and will fail sooner as a consequence.