To prepare 1 N ferrous ammonium sulfate solution, dissolve 392.15 g of the compound in distilled water and dilute to 1 L. This will yield a solution with a concentration of 1 N.
The oxidation state of Fe in ferrous ammonium sulphate is +2. The compound has the chemical formula FeSO4(NH4)2SO4. Since the sulfate ion (SO4^2-) has a charge of -2 and the ammonium ion (NH4^+) is a cation with a charge of +1, the Fe ion must have a charge of +2 to balance the overall charge of the compound.
You wrote the wrong question. It should be: What is the balanced equation of ammonium sulphate from ammonium and dilute sulphuric acid? Well the answer will be (NH4)+1(S04)-2 which equals to (NH4)2 (SO4)
YES!!! As the name 'sulphate' suggests, there is a sulphur component. Ferrous sulphate has the formula FeSO4 . This formula tells us that there are: - 1 atom of iron(Fe) 1 atom of sulphur (S) 4 atoms of oxygen (O4) NB There is also a Ferric Sulphate ; formula ( Fe2(SO4)3) This formula tells us that there are ;- 2 atoms of iron (Fe2) 3 atoms (3 x 1) of sulphur 12 atoms (3 x 4) of oxygen .
Ammonium sulfate has a chemical formula of (NH4)2SO4. This means each molecule contains 2 nitrogen atoms, 8 hydrogen atoms, 1 sulfur atom, and 4 oxygen atoms, totaling 15 atoms per molecule of ammonium sulfate.
To prepare 1 liter of a 1.25M ammonium hydroxide solution, you would need to dissolve 42.14 g of ammonium hydroxide (NH4OH) in enough water to make a total volume of 1 liter. Measure out the correct mass of ammonium hydroxide, add it to a volumetric flask, and then add water while stirring until the final volume reaches 1 liter. Make sure to wear appropriate safety gear and handle ammonium hydroxide with caution due to its caustic properties.
The oxidation state of Fe in ferrous ammonium sulphate is +2. The compound has the chemical formula FeSO4(NH4)2SO4. Since the sulfate ion (SO4^2-) has a charge of -2 and the ammonium ion (NH4^+) is a cation with a charge of +1, the Fe ion must have a charge of +2 to balance the overall charge of the compound.
Potassium dichromate is better for titration with ferrous ammonium sulfate because it reacts with ferrous ions in a 1:6 ratio, making it easier to determine the equivalence point accurately. Potassium permanganate, on the other hand, reacts with ferrous ions in a 1:5 ratio, which can lead to less precise results and requires a more careful technique.
Ferrous sulfate typically contains ferrous iron (Fe2+), sulfur in the form of sulfate (SO4^2-), and water molecules (H2O). It is commonly used as an iron supplement to treat or prevent iron deficiency anemia.
Ammonium sulfate is a neutral salt which shows alkaline behavior in solution due to the hydrolysis of the ammonium ion.
You wrote the wrong question. It should be: What is the balanced equation of ammonium sulphate from ammonium and dilute sulphuric acid? Well the answer will be (NH4)+1(S04)-2 which equals to (NH4)2 (SO4)
YES!!! As the name 'sulphate' suggests, there is a sulphur component. Ferrous sulphate has the formula FeSO4 . This formula tells us that there are: - 1 atom of iron(Fe) 1 atom of sulphur (S) 4 atoms of oxygen (O4) NB There is also a Ferric Sulphate ; formula ( Fe2(SO4)3) This formula tells us that there are ;- 2 atoms of iron (Fe2) 3 atoms (3 x 1) of sulphur 12 atoms (3 x 4) of oxygen .
This is the chemical salt 'Ammonium sulphate'. It is usually written as ' (NH4)2SO4 The (NH4)2 moiety tells us that there are '2'(two) ammoniums present. Since ammonium is made up of NH4 , then there are two(2) nitrogen (N) present and there are eight(8 = 4 x 2) hydrogen(H) present. The SO4 moiety tells us that there is one(1) sulphur (S) and there are four(4) oxygen present. Unlike the ammonium moiety there is no doubling of the sulphate moiety. Ammonium sulphate is a agricultural fertiliser.
Ammonium sulfate has a chemical formula of (NH4)2SO4. This means each molecule contains 2 nitrogen atoms, 8 hydrogen atoms, 1 sulfur atom, and 4 oxygen atoms, totaling 15 atoms per molecule of ammonium sulfate.
To prepare 1 liter of a 1.25M ammonium hydroxide solution, you would need to dissolve 42.14 g of ammonium hydroxide (NH4OH) in enough water to make a total volume of 1 liter. Measure out the correct mass of ammonium hydroxide, add it to a volumetric flask, and then add water while stirring until the final volume reaches 1 liter. Make sure to wear appropriate safety gear and handle ammonium hydroxide with caution due to its caustic properties.
To prepare the buffer using solid form reagents, prepare a 0.1 M ammonium acetate solution by dissolving 7.7 g ammonium acetate in a 1000 ml water. Adjust 1 L of this solution to pH 4.5 by adding acetic acid (about 8 ml) and 5 ml of 1 M p-TSA (equivalent to 5 mM p-TSA).
1. Ferrous metal 2. Non-Ferrous metal 3. Alloys
To prepare a 10 ppm sulphate solution from zinc sulphate, dissolve an appropriate amount of zinc sulphate in a solvent to achieve a concentration of 10 ppm. Calculate the mass of zinc sulphate needed based on its molecular weight and the volume of solvent you are using. Dilute this solution as needed to achieve the desired concentration.