0
What else can I help you with?
Will acetone remove rust from metal objects?
Not particularly well. Rust (iron oxide) is not soluble in acetone to any significant degree. If you use acetone on a rusty object and some of the rust comes off, it almost certainly has more to do with mechanical forces (you rubbing it with a cloth) than with the acetone.
What can remove gum from the dryer?
You can scrape it off with a fork/knife thing but it might take off some of the inside paint. If you cant just try taking it off with your hand in a glove and keep scraping it off with your hand until its all gone.
How do you remove fablon?
To remove Fablon, you can apply heat to soften the adhesive and then carefully peel it off. Use a hairdryer to warm up the Fablon and start peeling it off slowly from one corner, making sure not to damage the surface underneath. For any leftover adhesive, you can use a mild adhesive remover or rubbing alcohol to clean it off.
What do you use to remove super glue off your eye glasses lens?
Dampen a cloth with warm, soapy water and gently rub the affected area to remove the super glue from your eyeglasses lens. Avoid using harsh chemicals or scraping tools to prevent damaging the lens. If the glue does not come off easily, see an optician for professional help.
How do you remove duct tape glue?
You can remove duct tape glue by using a small amount of oil (such as vegetable or baby oil) or rubbing alcohol on the affected area. Let it sit for a few minutes to soften the adhesive, then gently scrape it off with a plastic scraper or your fingernail. Finally, wipe the area clean with a damp cloth.
How do you remove ecu plug on a 02 fiesta it is not a screw or a bolt.?
Finally managed it! the large plug on the ecu was bolted in with some kind of shear bolt. in the end i had to drill the top off of it,remove the plug and then with mole grips remove the thread of the bolt from the ecu.
1996 Camry How do you remove the front passenger seat bolt covers?
They are plastic right ? Prise them off with a screw driver, they'll come off quite easily.
How do you remove compressor belt on a 2000 mercury villager?
Loosen the tensioner locking bolt and and back off the screw. Consult a manual if you are not familiar with how to do this.
How to Remove stock Winchester defender?
First you must remove the buttpad, or buttplate that you have on the stock. You will reveal the hole that the bolt goes into. You will need either a long screw driver or a extension attachment for a ratchet wrench in order to take the bolt out and the stock off.
How do you replace chain drive sprocket on a stihl 08s?
remove bar, chain there should be a small cover over the drive sprocket, held on woth a screw, remove cover, then there should be a screw or bolt holding the sprocket on, remove that, pull old sprocket off, replace it in reverse.
How do you take off the gas tank on a suzuki intruder 800?
remove the seat and the main bolt is there and look between the handle bars and the tank for the other screw.
How do you remove a distributor cap screw bolt rusted stuck without destroying distributor?
Most of the time it breaks off and you will need to drill it out and replace screew.
How do you remove the flywheel on a polaris scrambler 400?
You have to have a special tool. It mounts to the side of the flywheel, then you screw the bolt into the plate onto the center shaft and it pushes it off...
How does the bumper in a 2002 passat come off?
One screw either side in the front arches. Remove indicators and one bolt either side under indicators, one big screw under the centre. And pull
How do you take fan blade off of a Emerson electric co fan?
To remove the fan blade from an Emerson electric fan, locate the screw or bolt at the center of the blade and use a screwdriver or wrench to loosen and remove it. Be sure to support the blade while removing the screw to prevent it from falling off. Once the screw is removed, gently pull the blade away from the motor to detach it.
How do you remove a cable TV filter?
Screw it off
How do you take the back screw off bottom steering column on 1999 cougar?
Turn wheel until head of screw is visible use 7/16 socket to remove bolt use screwdriver to open slot slide jackshaft out.
