0
How fast will liquid nitrogen freeze 1 cubic foot of ocean water when added directly to it?
The time it takes for liquid nitrogen to freeze 1 cubic foot of ocean water would depend on various factors including the initial temperature of the ocean water, the volume of liquid nitrogen added, and the surrounding conditions. Typically, liquid nitrogen is extremely cold at around -320°F and would quickly freeze the water upon contact.
What else can I help you with?
How does mixing hot water and liquid nitrogen make 'thunder' popping noises?
As liquid nitrogen is chilled and at a temperature of -196 degrees centigrade , when that liquid nitrogen is added up with hot water then the particles of iquid nitrogen get heated up and then turn into vapour while this procees is going the sound occurs
What reaction to liquid nitrogen?
Liquid nitrogen can cause severe frostbite and tissue damage upon contact with skin due to its extremely low temperature of -196 degrees Celsius. It can also cause rapid expansion when exposed to heat, leading to possible explosion hazards in closed containers. When added to water, liquid nitrogen can cause rapid boiling and create a dense fog due to the condensation of water vapor in the air.
What molecular changes happen when thermal energy is added or removed from nitrogen?
When thermal energy is added to nitrogen, the molecular motion increases, causing the molecules to vibrate and move more rapidly. This results in an increase in temperature. When thermal energy is removed, molecular motion decreases, leading to a decrease in temperature. The phase of nitrogen may change depending on the temperature, transitioning between solid, liquid, and gas states.
What do we call the solid being added to the liquid?
The solid being added to the liquid is called a solute. When the solute is dissolved in the liquid, it forms a solution.
What compound is formed when iron nitrogen and oxygen are added together?
Iron oxide is formed when iron, nitrogen, and oxygen are added together. It is a chemical compound that is commonly known as rust.
What effect does liquid nitrogen have on molecular kinetic energy?
Temperature is a measure of kinetic energy. Because liquid nitrogen is very cold, a system's kinetic energy will be collisionally transferred to the added liquid nitrogen. Thus, in general, adding liquid nitrogen will decrease a system's kinetic energy. (There are some exceptions where the system has less kinetic energy than the liquid nitrogen, such as liquid helium.)
Can liquid nitrogen be used for cooling water?
Yes, liquid nitrogen can be used to cool water. When added to water, liquid nitrogen evaporates rapidly, absorbing heat from the water and lowering its temperature. It is commonly used in laboratories and industrial settings for this purpose.
How does mixing hot water and liquid nitrogen make 'thunder' popping noises?
As liquid nitrogen is chilled and at a temperature of -196 degrees centigrade , when that liquid nitrogen is added up with hot water then the particles of iquid nitrogen get heated up and then turn into vapour while this procees is going the sound occurs
How does antifreeze work?
Antifreeze is a liquid added to the cooling system of an automobile to ensure that the water within it does not freeze solid.
What reaction to liquid nitrogen?
Liquid nitrogen can cause severe frostbite and tissue damage upon contact with skin due to its extremely low temperature of -196 degrees Celsius. It can also cause rapid expansion when exposed to heat, leading to possible explosion hazards in closed containers. When added to water, liquid nitrogen can cause rapid boiling and create a dense fog due to the condensation of water vapor in the air.
Can you add regular antifreeze to your gas tank to prevent freeze up?
No!!!! Regular Anti-Freeze is not a combustible liquid! Gasoline already has a "gas line anti-freeze" added to it in cold climates. In extremely cold areas, one small bottle of "gas line Anti-freeze" purchased at an Auto Parts store will help.
What molecular changes happen when thermal energy is added or removed from nitrogen?
When thermal energy is added to nitrogen, the molecular motion increases, causing the molecules to vibrate and move more rapidly. This results in an increase in temperature. When thermal energy is removed, molecular motion decreases, leading to a decrease in temperature. The phase of nitrogen may change depending on the temperature, transitioning between solid, liquid, and gas states.
What happens if energy is added or removed from a glass of ice water?
If energy is added to a glass of ice water, the ice will absorb the energy and begin to melt. If energy is removed, the ice will give off heat to its surroundings and may freeze further. Ultimately, the temperature of the glass of ice water will change based on whether energy is added or removed.
What happens if energy is added to a liquid at 20 Celsius?
If energy is added to a liquid at 20 Celsius, the temperature of the liquid will increase. This can lead to a phase change if the added energy is sufficient to raise the liquid's temperature above its boiling point, causing it to vaporize. If the added energy is not enough for a phase change, the increased temperature can affect the liquid's properties such as viscosity.
Can 2 liquids combined make smoke if yes what 2 liquids?
Yes, combining liquid nitrogen and water can create a smoky effect. When liquid nitrogen is added to water, the extreme cold temperature causes the water vapor in the air to condense into tiny water droplets, creating a mist or cloud that resembles smoke.
How water changes to a gas?
Like all other liquid to gas transitions, liquid water changes to gas: by absorbing energy from its surroundings or by having energy added to it. The molecules in a mass of water will have a distribution of energies, as will the gas above the surface. When a molecule at the surface collides with another molecule of sufficient energy, it can absorb energy from the collision and potentially acquire enough energy to escape from the liquid. If energy is being added to the liquid - as heat or agitation - there are more molecules with sufficient energy to make this happen. Energy can also be added directly to the liquid at the surface in the form radiant energy - such as the sun shining on it. A molecule can absorb this energy directly and thus gain enough energy to escape the surface of the liquid.
What happens to states of matter when you remove thermal energy?
When thermal energy is added the matter goes slower
