0
The volume of flue gases can vary depending on the source and composition of the gases. However, to calculate the volume in cubic meters (m3), you would need to know the temperature, pressure, and composition of the flue gases, as well as the flow rate in cubic meters per second (m3/s). This information is typically provided in engineering specifications or can be measured using appropriate instruments.
What else can I help you with?
Where is a flue located on fireplace?
The flue on a fireplace is typically located above the firebox, within the chimney. It is a passage that allows smoke and gases to be safely vented outside. Some fireplaces may have a flue at the top of the firebox itself.
What are three instruments that a flue gas analysis kit might contain?
A flue gas analysis kit may contain a digital manometer to measure draft pressures, a flue gas analyzer to measure levels of oxygen, carbon monoxide, and other gases, and a thermocouple for temperature measurement.
What is the difference between flue gas and stack gas?
Flue gas is the gas that is emitted from a combustion process within a building or industrial facility, while stack gas refers to the mixture of gases emitted from a chimney or stack. In general, flue gas is the specific type of gas that is produced from a specific process, while stack gas is the broader term that encompasses all gases emitted from a stack or chimney.
Flue gas analysis by Orsat apparatus?
The Orsat apparatus is used to analyze the composition of flue gases, typically measuring oxygen, carbon dioxide, and carbon monoxide levels. The apparatus involves passing a known volume of flue gas through different chemical solutions to absorb specific gases, allowing for quantification of each component. This analysis helps assess combustion efficiency and environmental impact of fuel-burning processes.
Which substance is used to neutralize sulfur dioxide in fue gases from power stations?
Limestone (calcium carbonate) is commonly used to neutralize sulfur dioxide in flue gases from power stations through a process called flue gas desulfurization (FGD). When sulfur dioxide reacts with limestone, it forms calcium sulfite, which can then be further oxidized to form gypsum (calcium sulfate), a less harmful solid waste product.
Difference between stack emission and flue gases?
Stack emissions are gases that are released into the atmosphere from industries. Flue gases are exited via a flue especially in power plants.
What has the author R B Spafford written?
R. B Spafford has written: 'Analysis of thermal decomposition products of flue gas conditioning agents' -- subject(s): Environmental aspects, Environmental aspects of Flue gases, Flue gases
What is it called when hot smoke gases up and go to the chimmeny?
This process is called "flue gas exhaust," where hot smoke gases from a fire or combustion process are directed up a chimney or flue to be released into the atmosphere.
How does a chimney heat exchanger system efficiently transfer heat from the flue gases to water for heating purposes?
A chimney heat exchanger system efficiently transfers heat from flue gases to water for heating by using metal tubes or coils that run through the chimney. As the hot flue gases pass through the chimney, they heat up the metal tubes, which in turn heat the water circulating through them. This process allows for the transfer of heat from the flue gases to the water, increasing the overall efficiency of the heating system.
What would the flue-gas symptoms be if there were too much airflow?
It would be Non-Existent. All Flue gases would be ventilated and thusly removed.
What has the author John M Espinosa written?
John M. Espinosa has written: 'Assessment of instrumentation and analytical techniques for high temperature in situ waste stream characterization of industrial flue gases' -- subject(s): Flue gases
What would the flue gas symptom be if there were too much airflow?
If there is too much airflow in a flue gas system, one common symptom could be a decrease in the temperature of the flue gases exiting the system. This can lead to issues such as poor combustion efficiency, increased energy consumption, and potentially incomplete combustion of fuels.
How many meanings does flue have and what are they?
"Flue" can refer to two main meanings. The first is a passage for smoke or fire gases to escape from a furnace, stove, or fireplace. The second is a channel or pipe for conveying water or other fluid.
Which chemical could be used to remove the acidic sulphur dioxide from flue gases?
Lime (calcium oxide or calcium hydroxide) is commonly used to remove acidic sulfur dioxide from flue gases. The sulfur dioxide reacts with lime to form calcium sulfite or calcium sulfate, which can then be removed from the gas stream.
Where is a flue located on fireplace?
The flue on a fireplace is typically located above the firebox, within the chimney. It is a passage that allows smoke and gases to be safely vented outside. Some fireplaces may have a flue at the top of the firebox itself.
How do I open the chimney flue?
To open the chimney flue, locate the handle or lever typically found near the fireplace or stove. Pull or push the handle in the direction indicated to open the flue, allowing smoke and gases to escape through the chimney.
What should be the range of temperature of flue gases at outlet of air pre-heater?
The typical flue gas temp at the inlet to the air heater is about 650-750 DegF range.
