On average, about 33 million BTUs of natural gas are required to produce a ton of ammonia. This amount can vary depending on the efficiency of the production process and the technology used.
To produce 1 ton of ammonia, approximately 1.7-1.8 tons of coal are needed. The coal is primarily used as a source of energy in the production of ammonia through the Haber-Bosch process.
To produce 1 ton of urea, approximately 1.32 tons of ammonia is needed. This is because urea is produced through the reaction of ammonia and carbon dioxide in a process called the Haber-Bosch process.
It takes about 1.2 cubic meters of natural gas to produce 1 kilogram of LPG (liquefied petroleum gas). This conversion factor can vary depending on the efficiency of the production process and the composition of the natural gas.
To clean with ammonia, you can dilute 1/4 cup of ammonia with 1 quart of water for general cleaning purposes. It is important to make sure the area is well-ventilated when using ammonia as it can produce strong fumes. Additionally, avoid mixing ammonia with products containing bleach as it can create harmful fumes.
Each ton of Urea will need 930 cubic meter of natural gas. It will require 230 cubic meter for conversion and nearly 700 cubic meter for input chemical. In MMBTU terms, it will require nearly 27 MMBTU. In calorific value, it will require 7 Giga calories.
Around 350 million tonnes.
On average, about 1050 cubic feet of natural gas is required to produce 1 ton of steam. This can vary depending on the efficiency of the boiler and the heating value of the natural gas being used.
To produce 1 ton of ammonia, approximately 1.7-1.8 tons of coal are needed. The coal is primarily used as a source of energy in the production of ammonia through the Haber-Bosch process.
To produce 1 ton of urea, approximately 1.32 tons of ammonia is needed. This is because urea is produced through the reaction of ammonia and carbon dioxide in a process called the Haber-Bosch process.
It takes about 1.2 cubic meters of natural gas to produce 1 kilogram of LPG (liquefied petroleum gas). This conversion factor can vary depending on the efficiency of the production process and the composition of the natural gas.
How much steam is required to produce 5 MW power in steam turbine?In fully condensing turbine we will need 20 TPH steam required to generate for 5MW
440 tones
No, but the bacteria and fungi doing the decomposition produce many gases including ammonia, carbon dioxide, hydrogen sulfide, and many worse smelling ones.A small portion ammonia, but most does not. Ammonia is a compound composed of nitrogen and hydrogen. When your body decomposes, much of the mass becomes carbon dioxide and water. Some if it goes into more complex compounds found in the organisms doing the decomposing.
On average, it takes about 660 gallons of water to produce one burger.
On average, it takes about 660 gallons of water to produce one hamburger.
Ammonia is a natural occurring compound in the blood. It's typically the result of intestinal bacteria during the digestion process. Usually, the body will process the ammonia and you don't have much of an odor, but large amouns of blood can give off a small amount of ammonia. But even small amounts of ammonia will give off the characeristic smell.
To clean with ammonia, you can dilute 1/4 cup of ammonia with 1 quart of water for general cleaning purposes. It is important to make sure the area is well-ventilated when using ammonia as it can produce strong fumes. Additionally, avoid mixing ammonia with products containing bleach as it can create harmful fumes.