yes....
it is an answer for porosity....
Porosity 4 sintered glass typically has pore sizes ranging from 4 to 16 micrometers, with an average pore size of around 8 micrometers. The pore size distribution can vary depending on the specific manufacturing process and conditions used to produce the sintered glass material.
Sintered glass is a glass mesh used for filtration. It can be used instead of filter paper, and in fact is preferable to filter paper. Its other advantage is that it is permanent so you can get various different pieces of glassware with sintered glass in it e.g. an enclosed filter suitable for filtration under nitrogen. As for the porosity.... Porosity of sintered glass is labelled by integers from 0-5 (viz. 0, 1, 2, 3, 4, 5) where 0 has a pore size of 160-250 micrometres and is considered course filtration, that is fluid will pass through it quickly and some finer solids will pass through. Whereas, porosity 5 has a pore size of 4-10 micrometers so even ultrafine solids will not pass through and liquids will drop through. I hope this is clear, makes sense and is helpful.
To carry out a hair porosity test, take a few clean strands of hair and place them in a bowl of water. If the hair sinks quickly, it has high porosity. If it floats, it has low porosity. If it floats in the middle, it has normal porosity. This test helps determine how well your hair absorbs and retains moisture.
Clear glass is an example of a translucent material, allowing light to pass through it but scattering the light in multiple directions.
To conduct a porosity hair test, take a strand of hair (clean and dry) and place it in a bowl of water. If the hair sinks quickly, it likely has high porosity. If it floats, it might have low porosity. If the hair floats in the middle of the water, it is considered to have normal porosity.
No, glass is not porous
Because of the gravity of the earth....
Here this is an example one : This is applied to the wood before staining and reduces the porosity of the wood.
Porosity 4 sintered glass typically has pore sizes ranging from 4 to 16 micrometers, with an average pore size of around 8 micrometers. The pore size distribution can vary depending on the specific manufacturing process and conditions used to produce the sintered glass material.
Sintered glass is a glass mesh used for filtration. It can be used instead of filter paper, and in fact is preferable to filter paper. Its other advantage is that it is permanent so you can get various different pieces of glassware with sintered glass in it e.g. an enclosed filter suitable for filtration under nitrogen. As for the porosity.... Porosity of sintered glass is labelled by integers from 0-5 (viz. 0, 1, 2, 3, 4, 5) where 0 has a pore size of 160-250 micrometres and is considered course filtration, that is fluid will pass through it quickly and some finer solids will pass through. Whereas, porosity 5 has a pore size of 4-10 micrometers so even ultrafine solids will not pass through and liquids will drop through. I hope this is clear, makes sense and is helpful.
The pore size is the average 100 micrometers.
big particles=low porosity small particles=high porosity
Glass is an example of an amorphous solid material
how do we calculate porosity of ceramic?
Porosity is the formation of bubbles in the weld.
poorly sorted = low porosity well sorted = high porosity
Glass is an example of an amorphous solid or non-crystalline material. Glass is typically characterized to be brittle and optically transparent.