Using an aluminum chimney liner with a log burner is generally not recommended due to the high temperatures produced by burning logs. Aluminum liners may not withstand these temperatures and could pose a fire hazard. It is better to use a stainless steel liner which is more durable and suitable for log burners.
A log burner is a type of stove or fireplace that burns wood logs to produce heat and warmth. It is a popular choice for heating homes and is often more energy-efficient and environmentally friendly than traditional open fireplaces.
Had the gas man in and he changed the gas supply line from the shutoff valve to the log set from a one/quarter to a three/eighths diameter line. Then he adjusted the air mixture (it is a secured by a small screw and turns to restrict or increase air supply to the burner. In my case he increased the amount of air and that decreased the noise level.Try it first by playing with the air mixture. That might solve your problem without having to mess with increasing the size of the gas supply line. If you have to change the line don't forget to check for leaks by squirting some dish-washing liquid on the connections.
The chemical smell in a gas log fireplace could be due to dust and debris burning off when you first start using it after a period of inactivity. It could also be caused by the presence of soot or residue on the burner or logs. It's important to ensure proper ventilation and have the fireplace inspected to rule out any gas leaks or other safety concerns.
pH = pKa + log([A-]/[HA]) pH = pKa+log([conjugate base]/[undissociated acid]) pKa is also a measure of the strength of an acid. A low pKa is a strong acid, a higher pKa is a weak acid.
In mathematics, the logarithm function is denoted by "log". The base of the logarithm is typically specified, for example, "Log S" usually refers to the logarithm of S to a certain base (e.g., base 10 or base e).
A log burner if it is gas, should be installed professionally by a plumber or contractor who could run the gas lines to the furnace. If it is a wooden log burner than home depot and lowes are good choices.
There are a lot of companies that sell parts for a gas log burner. If one wants to buy parts for a gas log burner one can go to the store where one originally bought the gas log burner. They usually sell separate parts too, and one will certainly get the right parts.
Yes, of coarse you can!
A log burner is a type of stove or fireplace that burns wood logs to produce heat and warmth. It is a popular choice for heating homes and is often more energy-efficient and environmentally friendly than traditional open fireplaces.
Yes, you can install a log burner on a pressurized heating system, but it requires careful consideration and proper installation. The log burner must be compatible with the system, and the installation should adhere to local building regulations and safety standards. Additionally, a qualified installer should ensure that the flue and venting are correctly configured to prevent any potential hazards. Always consult with a professional to ensure safe and efficient operation.
You go to your nearest diesel shop and ask for a sleeve installer for a 6GB1. Since the tool fits in the liner " sleeve " it can be used at the bottom of the liner ( in the crank case ) to remove a liner. Just rebuilt 2 6GB1 for 2 link belt log loaders. Cakewalk!
Well- you can't. Ventless is a different design. To try to do this would be extremely dangerous. And you can its about the perspective of the asking party. Did they mean "can you take a vented log set/ and burner and make it into a vent-less log set/ burner and just close the damper then yes that would be dangerous and cannot be done, however if the asking party just meant can they use the existing fire box, and using a vent-less burner then this would be safe and acceptable
Lime wood is generally considered good for burning in a log burner due to its relatively low moisture content and high heat output. It burns steadily and produces a pleasant aroma, making it a suitable choice for both warmth and ambiance. However, it may not be as widely available as other hardwoods, so availability can vary. Always ensure that the wood is well-seasoned for optimal burning efficiency.
yes
Vent free appliances CANNOT be converted. To change it over you have to buy a whole new burner. The local hardware store does not carry orifices for vent free appliances, and altering an orifice can lead to explosion or carbon monoxide poisoning.
tom dunsdons dad and mum log log log log log log log in my buttt
log(x6) = log(x) + log(6) = 0.7782*log(x) log(x6) = 6*log(x)