answersLogoWhite

0

yes it is dangerous, becasue it will become warmer and then a exothermic reaction will happen

hope this helped ;D

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Chemistry

What are the Ways to convert dilute sulphuric acid to concentrated sulphuric acid?

One way to convert dilute sulphuric acid to concentrated sulphuric acid is through a process called evaporation. In this method, the dilute acid is heated to evaporate the water content, leaving behind the concentrated acid. Another method involves adding concentrated sulphuric acid to the dilute solution until the desired concentration is achieved.


How do you prepare 1normal sulphuric acid?

To prepare 1M sulfuric acid (H2SO4), you would need to dilute concentrated sulfuric acid with water carefully while stirring. Do this by adding the concentrated acid slowly to water, never the other way around, to prevent violent splattering. Always handle concentrated sulfuric acid with extreme caution, as it is highly corrosive.


Why sulfuric acid is mixed in water?

Sulfuric acid is highly concentrated and corrosive. Mixing it with water helps to dilute it slowly and control the release of heat that is generated during the dilution process. This prevents the mixture from becoming too hot and potentially causing an explosive reaction.


Safest way to dilute concentrated sulfuric acid?

To dilute concentrated sulfuric acid, always add the acid to water slowly while stirring constantly. Never pour water into concentrated acid, as this can cause a violent exothermic reaction. It is important to wear appropriate personal protective equipment and work in a well-ventilated area when handling sulfuric acid.


How do you prepare 50 mM Sulphuric acid solution?

To prepare a 50 mM Sulphuric acid solution, you would need to calculate the required volume of concentrated Sulphuric acid (typically 96-98%) needed to dilute in water to achieve the desired concentration. You can use the formula: C1V1 = C2V2, where C1 is the concentration of the concentrated acid, V1 is the volume of concentrated acid needed, C2 is the desired concentration (50 mM), and V2 is the final volume of the solution you want to prepare.

Related Questions

What are the Ways to convert dilute sulphuric acid to concentrated sulphuric acid?

One way to convert dilute sulphuric acid to concentrated sulphuric acid is through a process called evaporation. In this method, the dilute acid is heated to evaporate the water content, leaving behind the concentrated acid. Another method involves adding concentrated sulphuric acid to the dilute solution until the desired concentration is achieved.


Is dilute sulphuric acid compound?

No. It is a mixture of sulphuric acid and water.


Is the addition of water to concentrated sulphuric acid chemical or physical change?

Chemical change


What happens when you mix water and sulphuric acid?

when we add water n sulphuric acid then dilute sulphuric acid is formed. But we have to mix concentrated acid to water not water to acid otherwise the container in which u r mixing may explode because this reaction is highly exothermic.


How do you prepare 1normal sulphuric acid?

To prepare 1M sulfuric acid (H2SO4), you would need to dilute concentrated sulfuric acid with water carefully while stirring. Do this by adding the concentrated acid slowly to water, never the other way around, to prevent violent splattering. Always handle concentrated sulfuric acid with extreme caution, as it is highly corrosive.


What is the difference between dilutes and concentrated acid's?

diluted acid is less concentrated i.e. it is mixed with water and a less harmful(like sulphuric acid.) whereas concentrated acid is in its original form...


Why sulfuric acid is mixed in water?

Sulfuric acid is highly concentrated and corrosive. Mixing it with water helps to dilute it slowly and control the release of heat that is generated during the dilution process. This prevents the mixture from becoming too hot and potentially causing an explosive reaction.


Safest way to dilute concentrated sulfuric acid?

To dilute concentrated sulfuric acid, always add the acid to water slowly while stirring constantly. Never pour water into concentrated acid, as this can cause a violent exothermic reaction. It is important to wear appropriate personal protective equipment and work in a well-ventilated area when handling sulfuric acid.


How do you make 0.1 Molar of sulfuric acid?

9,8 g concentrated sulphuric acid to 1 L of water (attention to mixing !)


How do you prepare 50 mM Sulphuric acid solution?

To prepare a 50 mM Sulphuric acid solution, you would need to calculate the required volume of concentrated Sulphuric acid (typically 96-98%) needed to dilute in water to achieve the desired concentration. You can use the formula: C1V1 = C2V2, where C1 is the concentration of the concentrated acid, V1 is the volume of concentrated acid needed, C2 is the desired concentration (50 mM), and V2 is the final volume of the solution you want to prepare.


What makes a substance less concentrated by adding a liquid like water?

your ugly


Does adding detergent to water make it more dilute or concentrated?

Adding detergent to water does not make it more dilute or concentrated. Detergent dissolves in water, so it is considered a solution. The concentration of the detergent in the water depends on the amount of detergent added.