Iron is an element (can't be divided into two things), although steel is iron mixed with things like carbon, vanadium, manganese, chromium or tungsten. True iron filings are just little shavings of iron, but steel is often used. The extraction and processing of iron ore utilizes the magnetic property of iron, so almost all iron used already has a magnetic polarity "built in".
I think you mean "filings" sweetheart.
Yes, iron filings are metal.
Dark Powder
Iron!
iron fillings and sand
All you have to do is put a magnet over the mess of sawdust and iron fillings and the iron fillings will get stuck to the magnet. Then their seperated
Iron filings would be made from comon steel stock, which would embody carbon in its makeup. Ignoring that distinction, iron filings could be considered a uniform material. But soon subject to oxidation.
use a magnet for separating it the iron fillings will go to the magnet and the sulfer will stay on the ground :)
The easiest way is with a magnet. It'll attract the iron and not the copper. If you're on a higher budget, the difference in the melting point could help.
Iron fillings are not a compound; they are only iron (Fe).
Iron fillings are easily sedimented in water.
you an use a magnet to get the iron fillings out
iron fillings and sand
All you have to do is put a magnet over the mess of sawdust and iron fillings and the iron fillings will get stuck to the magnet. Then their seperated
Hope it has to be FILINGS and not FILLINGS.
use a magnet
Iron filings would be made from comon steel stock, which would embody carbon in its makeup. Ignoring that distinction, iron filings could be considered a uniform material. But soon subject to oxidation.
Heating sulfur with iron fillings lead to the formation of iron sulfide - a chemical compound.
Very easily, put a magnet on them it will attract the iron but not the aluminium.
No, iron filings are not a mixture
Iron fillings are heavier.