It occurs when you did not fully close the air-hole on lighting up your Bunsen burner. Flames are observed to be green and it also produces a soot. Therefore we should immediately turn off the gas supply as the unburnt gas would fill the air, making the room flammable.
When strike back occurs, the first step is to immediately shut off the fuel supply to the equipment. Next, the equipment should be allowed to cool down before attempting any further actions. Finally, the root cause of the strike back should be identified and corrected to prevent it from happening again.
The odor emitted by the strike back flames on a Bunsen burner is typically a combination of unburned gas, soot, and carbon monoxide. This can result from incomplete combustion when the air hole on the burner is not properly adjusted, causing the flame to produce a smoky or sooty odor. It's important to adjust the air hole to achieve a clean, blue flame for optimal combustion.
Flame Sagittario's special move is "Burning Fire Strike," where it charges at its opponent with great speed and power, delivering a fiery attack that can overwhelm the opponent.
Wax is the primary component that melts in a candle flame, as it is the fuel that provides the energy for the flame to burn. The heat of the flame causes the wax to melt, which then travels up the wick through capillary action and vaporizes to produce light and heat.
The phrase "striking back of burner" typically refers to the process of igniting a gas burner by creating a spark or flame to initiate combustion. In a gas stove or furnace, for example, the burner is "struck back" by a spark or pilot light to start the flow of gas and produce a flame. This ignition method is crucial for safely and efficiently operating gas-powered appliances.
A burner can strike back due to an excessive flow of gas or air, causing the flame to ignite outside the burner. This can happen if the burner is not properly adjusted or if there is a blockage in the gas or air supply lines. Improper maintenance or a malfunctioning burner also increases the risk of a burner strike back.
When strike back occurs, the first step is to immediately shut off the fuel supply to the equipment. Next, the equipment should be allowed to cool down before attempting any further actions. Finally, the root cause of the strike back should be identified and corrected to prevent it from happening again.
The collar of a Bunsen burner gets hot because it is close to the flame, which heats it up through conduction. When a Bunsen burner "strikes back," it can cause the flame to come into contact with the collar, making it heat up rapidly.
The odor emitted by the strike back flames on a Bunsen burner is typically a combination of unburned gas, soot, and carbon monoxide. This can result from incomplete combustion when the air hole on the burner is not properly adjusted, causing the flame to produce a smoky or sooty odor. It's important to adjust the air hole to achieve a clean, blue flame for optimal combustion.
D) activation energy
because of the gravity of the sun
Project Strike Back was created in 2001.
Flame luminosity occurs because of lack of oxygen. Also, the air holes in the Bunsen burner affects the flame.
The Wildhearts Strike Back was created in 2004-10.
shear
Flame Sagittario's special move is "Burning Fire Strike," where it charges at its opponent with great speed and power, delivering a fiery attack that can overwhelm the opponent.
The stress that causes strike-slip faults is produced by a shearing force and so is called shear stress.