You get an reaction on witch the result is Hydrogen . It was an old metod of producing hydrogen gas use by early balloons and dirigibles. Of cousre is not ane reliable "economic" solution so this days was forget. But you can fous it on books along with the other way of producing hydrogen by miging sulfuric acid with iron.
Carborane acid is the world's strongest acid, followed by fluorosulfonic acid. The acidity of carborane acid has been shown at least a million times stronger than concentrated sulfuric acid, and hundreds of times stronger than the previous record holder fluorosulfonic acid.
You must initially convert it into benzene then heat it with Zn dust. And add CH3-Cl+anhydrous AlCl3 followed by hot concentrated KMnO4.
To prepare 1M sulphuric acid from concentrated sulphuric acid:First consider the molecular weight of H2SO4 = 98 g/mol, so you have to add 98g of conc. acid and make up to 1 liter of water (as pointed out at the 4thpoint).Considering that acid is a liquid, you should also consider density: where density = mass/volume, which is said on the bottle to be (about) 1.84 g/mL,so then you have: volume = 98g / 1.84(g/mL) = 53.2 mLNow you have to consider the acid purity, usually 98% then you have to do this: 53.2 mL if the acid were 100% pure convert in mL given with the purity of 98%, so 100% x 53.2 mL / 98% = 54.3 mL of (98%) concentrated acid.Finally CAREFULLY add this 54.3 mL (or 98 g, cf. first point) to about 0.9 L dist. water while continuously stirring (evolving heat!), and after that fill it up to 1.00 L with also dist. water. Never reverse this: DO NOT add water to concentrated fluids!
React with alcoholic KOH (dehydrohalogenation) to give 1-propene, followed by treatment with HCl (electrophilic addition).
It's not a good idea. From the web site of the CDC (Center for Disease Control): Ingestion of dilute solutions of hydrogen peroxide may result in vomiting, mild gastrointestinal irritation, gastric distension, and on rare occasions, gastrointestinal erosions or embolism (blockage of blood vessels by air bubbles). Ingestion of solutions of 10-20% strength produces similar symptoms, but exposed tissues may also be burned. Ingestion of even more concentrated solutions, in addition to the above, may also induce rapid loss of consciousness followed by respiratory paralysis.
Try "in addition to" or "followed by".
Carborane acid is the world's strongest acid, followed by fluorosulfonic acid. The acidity of carborane acid has been shown at least a million times stronger than concentrated sulfuric acid, and hundreds of times stronger than the previous record holder fluorosulfonic acid.
No, "in addition" is not a preposition. It is a phrase that is used as an adverb to introduce additional information or to indicate something is being added to what has already been stated.
df;ahdsfn;aldsnfhasodfna;dfknoadnf
New York had the highest value of product shipments for this industry, followed by South Carolina, California, Florida, and Virginia.
Islam is concentrated in the Middle East, North Africa, South Asia, and Southeast Asia. Countries with the highest Muslim populations include Indonesia, Pakistan, India, Bangladesh, and Nigeria. Islam is the predominant religion in many of these regions.
You can use phrases like "subsequently," "following this," or "in addition." These words help to transition smoothly between ideas in your essay.
You must initially convert it into benzene then heat it with Zn dust. And add CH3-Cl+anhydrous AlCl3 followed by hot concentrated KMnO4.
In BODMAS it stands for: Brackets Of Division Multiplication Addition Subraction It means that in a sum you must always start with the brackets, followed by division/multiplication and finally addition/subtraction.
completely dry. It should be allowed to cure for 4-6 weeks. Treating it with 10% hydrochloric acid, followed by fresh water will give the best adhesion.
Order of arithmetical operations is called BIDMAS meaning Brackets, Indices, Division, Multiplication, Addition followed by Subtraction.
To prepare 1M sulphuric acid from concentrated sulphuric acid:First consider the molecular weight of H2SO4 = 98 g/mol, so you have to add 98g of conc. acid and make up to 1 liter of water (as pointed out at the 4thpoint).Considering that acid is a liquid, you should also consider density: where density = mass/volume, which is said on the bottle to be (about) 1.84 g/mL,so then you have: volume = 98g / 1.84(g/mL) = 53.2 mLNow you have to consider the acid purity, usually 98% then you have to do this: 53.2 mL if the acid were 100% pure convert in mL given with the purity of 98%, so 100% x 53.2 mL / 98% = 54.3 mL of (98%) concentrated acid.Finally CAREFULLY add this 54.3 mL (or 98 g, cf. first point) to about 0.9 L dist. water while continuously stirring (evolving heat!), and after that fill it up to 1.00 L with also dist. water. Never reverse this: DO NOT add water to concentrated fluids!