answersLogoWhite

0

Kerosine, Varsol

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Chemistry

Effect of stearic acid in flash point?

Stearic acid has a minimal effect on the flash point of a substance due to its low volatility and high melting point. The flash point is primarily influenced by more volatile components in a mixture. As stearic acid is a solid at room temperature and has a relatively low vapor pressure, it does not significantly impact the flash point of a substance.


What is the flash point of PVC?

The flash point of PVC (polyvinyl chloride) is not applicable as it does not have a flash point like flammable liquids. Instead, PVC will begin to decompose and release toxic fumes when exposed to high temperatures, which can pose a fire hazard.


How do you increase the flash point of liquid?

Depending on what kind of liquid it is try adding a couple drops of gasoline. Don't use to much try three or four drops. That is only if you need it to light with a spark. If you just need to light it easier add some lighter fluid, charcoal lighter fluid to be exact.


What are the properties of an ideal recrystallization solvent?

An ideal recrystallization solvent should have high solubility for the compound at high temperatures to dissolve the impurities and low solubility at low temperatures to allow the compound to crystallize out. It should also be chemically inert towards the compound, easily evaporated to recover the purified compound, and have a boiling point lower than the melting point of the compound.


Do solutes increase or decrease the boiling point of a solvent?

No; solutes don't decrease the boiling point of the solvent, they increase it! Solutes decrease the melting point of the solvent! Think of it this way: low goes lower (melting point) and high goes higher (boiling point).

Related Questions

How high the boiling point can be elevated depends on the?

How high the boiling point can be elevated depends on the amount and type of solute added to the solvent. The boiling point elevation is a colligative property, meaning it depends on the number of solute particles in the solvent.


Effect of stearic acid in flash point?

Stearic acid has a minimal effect on the flash point of a substance due to its low volatility and high melting point. The flash point is primarily influenced by more volatile components in a mixture. As stearic acid is a solid at room temperature and has a relatively low vapor pressure, it does not significantly impact the flash point of a substance.


What is the flash point of PVC?

The flash point of PVC (polyvinyl chloride) is not applicable as it does not have a flash point like flammable liquids. Instead, PVC will begin to decompose and release toxic fumes when exposed to high temperatures, which can pose a fire hazard.


Why is High flash high speed diesel used in ships instead of high speed diesel?

HSD is having a flash point about 32 deg C and HFHSD flash point is above 66 deg C. Ships' engines are designed with low RPM where as road running vehicles engines are designed to above 750 RPM During compression ,fuel get heated and it can be under risk of Fire due to low flash point of HSD. To avoid or minimize fire risk HFHSD(flash point above66) is used in ships


How do you increase the flash point of liquid?

Depending on what kind of liquid it is try adding a couple drops of gasoline. Don't use to much try three or four drops. That is only if you need it to light with a spark. If you just need to light it easier add some lighter fluid, charcoal lighter fluid to be exact.


What are the properties of an ideal recrystallization solvent?

An ideal recrystallization solvent should have high solubility for the compound at high temperatures to dissolve the impurities and low solubility at low temperatures to allow the compound to crystallize out. It should also be chemically inert towards the compound, easily evaporated to recover the purified compound, and have a boiling point lower than the melting point of the compound.


What is flash point of grp?

The flash point of Glass Reinforced Plastic (GRP) materials can vary depending on the specific composition and manufacturing processes used. In general, the flash point of GRP materials is relatively high, typically above 200°C (392°F). It is always important to refer to the material safety data sheet (MSDS) or consult with the manufacturer for specific flash point information.


Can you use diesel in a zippo?

No, you can't. Diesel has much too high a flash point and won't ignite in a Zippo.


Do alkynes have high melting point?

For example the melting point of acetylene -80,8 oC.


What is relation between flash point and heat resistance temperature of paint?

The flash point of a paint refers to the temperature at which it can ignite in the presence of a flame or spark. Heat resistance, on the other hand, pertains to the paint's ability to withstand high temperatures without degrading or losing its properties. While a high heat resistance temperature suggests that the paint can withstand exposure to heat without significant damage, it does not necessarily correlate to a higher flash point.


Do solutes increase or decrease the boiling point of a solvent?

No; solutes don't decrease the boiling point of the solvent, they increase it! Solutes decrease the melting point of the solvent! Think of it this way: low goes lower (melting point) and high goes higher (boiling point).


What is the flash point of paper towels?

Well, isn't that a lovely question! The flash point of paper towels is around 218-246 degrees Celsius, which is when they can catch fire if exposed to a flame or high heat for a prolonged period. Remember to always be mindful of fire safety and keep flammable materials away from sources of heat.