Sterile or Sterilized Water - Water that meets the requirements under "Sterility Tests" in the United StatesPharmacopeia.
Distilled Water - Water that is demineralized by distillation and complies with the requirements for purified water set forth in the United States Pharmacopeia
DM water- Water that is demineralized by distillation, deionization, or reverse osmosis and complies
with the requirements for purified water set forth in the United States Pharmacopeia
To prepare Schultz reagent, mix one part of concentrated sulfuric acid with nine parts distilled water. Allow the mixture to cool before use. This reagent is commonly used for the detection of proteins in biological samples.
Dissolve 50g of KI in the smallest possible quantity of cold water (50 ml). Add a saturated solution of mercuric chloride (about 22g in 350ml of water will be needed) until an excess is indicated by the formation of a precipitate. Then add 200ml of 5N NaOH and dilute to 1 liter. Let settle, and draw off the clear liquid.
To prepare Benedict's reagent, dissolve 17.3 g of sodium citrate and 1.72 g of anhydrous sodium carbonate in distilled water. Then add 0.5 g of copper sulfate pentahydrate and heat the solution until the salts dissolve completely. Adjust the volume to 1 L with distilled water, filter the solution if needed, and store in a cool, dark place.
The abbreviation for distilled water is H2O.
Steam distilled water is produced by heating water to create steam, which is then condensed back into liquid form. Distilled water, on the other hand, is produced by boiling water and collecting the steam, which is then condensed into a separate container. Both methods remove impurities from the water, but steam distilled water may retain more of its natural minerals compared to distilled water.
i dont know soory
To prepare Nessler's reagent, dissolve 7g of mercuric iodide and 35g of potassium iodide in distilled water, and then add 100g of potassium hydroxide pellets. Once the solution is clear, dilute it with water to make 1 liter of Nessler's reagent. This reagent is commonly used for detecting ammonia in solutions.
A suitable reagent blank for measuring the absorbance of a protein solution mixed with Bradford reagent at 595nm would be a blank containing all components of the reaction except the protein sample, such as water or buffer mixed with the Bradford reagent. This blank will account for any background absorbance contributed by the reagent itself, allowing for a more accurate measurement of the protein concentration.
To prepare Schultz reagent, mix one part of concentrated sulfuric acid with nine parts distilled water. Allow the mixture to cool before use. This reagent is commonly used for the detection of proteins in biological samples.
Laboratory reagent consisting of potassium phosphate and calcium phosphate, magnesium sulfate, and ammonium tartrate in distilled water
Dissolve 50g of KI in the smallest possible quantity of cold water (50 ml). Add a saturated solution of mercuric chloride (about 22g in 350ml of water will be needed) until an excess is indicated by the formation of a precipitate. Then add 200ml of 5N NaOH and dilute to 1 liter. Let settle, and draw off the clear liquid.
No, distilled water is distilled water.
The LAL reagent water can be sterile WFI or other water that show reaction with the specific LAL reagent with which it can be used, at the limit of the sensitivity of such reagent.
Barritt's reagent A contains potassium hydroxide (KOH) and Barritt's reagent B contains alpha-naphthol and concentrated sulfuric acid. Both reagents are used in the biochemical identification of bacteria, specifically for distinguishing between oxidase-positive and oxidase-negative bacteria.
1 part of 0.1% naphthylenediamine dihydrochloride in distilled water +1 part 1% sulphanilamide in 5%concentrated phosphoric acid
(Wagner's reagent is used to test for alkaloids). To prepare Wagner's reagent; Dissolve 2g of iodine and 6g of KI in 100ml of water. -Atolani Olubunmi, Nigeria
Distilled water is not a base.