The boiling point of ethanoic acid (acetic acid) at 65 kPa is approximately 104 degrees Celsius.
My mistake, its should be about 111 degrees celsius.
At 101.325 kPa, the melting point of xenon is 161.40 K or -111.75 °C or -169.15 °F. At 101.325 kPa, the boiling point of xenon is 165.051 K or -108.099 °C or -162.578 °F. It is a Gas in normal phase or at STP.
The vapor pressure of cyclohexane at its normal boiling point of 81.0 degrees Celsius is 101.3 kPa.
The boiling point of brine, which is a solution of salt in water, is higher than the boiling point of pure water. The exact boiling point of brine depends on the concentration of salt in the solution. For a typical concentration of around 23.3%, the boiling point of brine is around 109.4°C (229.9°F).
At STP ie (1 Atm or 101.325 kPa, 760mm Hg) The boiling point of pure water is 212 °F or 100 °C The freezing point of pure water is 32 °F or 0 °C
My mistake, its should be about 111 degrees celsius.
Each liquid has a different boiling point; 101,3 kPa is he standard atmosphere pressure (atm).
The boiling point of bromine under a pressure of 75 kPa is approximately 58°C. At this pressure, the boiling point of bromine is lower than its usual boiling point of 58.8°C at standard atmospheric pressure.
At it boiling point: boiling temperature AND pressure:Water boiling at 100oC at 100 kPa (1 atm.)
Boiling point of Water is 100 °C at 101.33 kPa = 1 Atmosphere At lower pressures the boiling point temperature reduces. For example: water boils at 3.8 °C at 0.8 kPa. At higher pressures the boiling point temperature increases. For example: water boil at 198.3 °C at 1500 kPa.
The vapor pressure of cyclohexane at its normal boiling point of 81.0 degrees Celsius is 101.3 kPa.
At 101.325 kPa, the melting point of xenon is 161.40 K or -111.75 °C or -169.15 °F. At 101.325 kPa, the boiling point of xenon is 165.051 K or -108.099 °C or -162.578 °F. It is a Gas in normal phase or at STP.
Water has a boiling point of 367 K ( = 94oC) at 81.4 kPa (80% of Standard Sea level Pressure)
The boiling point would be 35 degrees Celsius. Use a graph comparing vapor pressure to temperature, go to the point where propanone is at 48 kpa, and see what the temperature is.
Pressure (kPa), volume (liters), temperature (Kelvins), and number of moles
The boiling point of brine, which is a solution of salt in water, is higher than the boiling point of pure water. The exact boiling point of brine depends on the concentration of salt in the solution. For a typical concentration of around 23.3%, the boiling point of brine is around 109.4°C (229.9°F).
120 kP