0.284 pounds / cu in ( 7.86 grams / cu cm )
I believe Aluminium = 2.7, and Carbon Steel = 7.85
Steel. The density of steel is almost 3 times that of aluminum.
Iron has a density of approximately 7.86g/cm3. Nails are not usually made from pure iron, but from soft steel, a mixture of iron and carbon. The density, however, is pretty much the same depending on the grade of steel used.
When steel gets hot, it gets slightly larger due to thermal expansion. Since the mass stays the same, and density = mass/volume, it gets (very, very slightly) less dense. So cold steel is more dense than hot steel.
Stainless steel 430 has the density rho = 7,750 kg/m3 or rho = 7.75 g/cm3.
There may be no difference at all. In structural steel, 44W is a perfornamce rating (minimum yield strength 44,000psi). 1020 is steel chemistry (non-alloyed steel with 2.0% carbon). Quite often 44W is 1018 (1.8% carbon) or 1020 in composition. If your steel dealer is selling you 44W, ask about the composition.
its having the magnetic property
1020
Steel has the greatest density of the three.
Pearlite and ferrite
The density of steel as per IS 2062 will vary. This is because steel's density typically changes with composition.
The density of aluminized steel is 2710. Additionally, the density of its counterpart, carbon steel, is slightly different at 2833.
density of galvanized steel 7850kg/m3
density of galvanized steel 7850kg/m3
SAE 1020 Bar stock is a type of Carbon steel with 1% max Carbon. The American Iron and Steel Institute (AISI) and SAE are institutions that developed a standard numbering system for steels.
the density of TMT R/F steel is 7850
It is nothing but Mild Steel or M.S. commonly called