water is a liquid, steam is a gas
Steam distilled water is produced by heating water to create steam, which is then condensed back into liquid form. Distilled water, on the other hand, is produced by boiling water and collecting the steam, which is then condensed into a separate container. Both methods remove impurities from the water, but steam distilled water may retain more of its natural minerals compared to distilled water.
Water vapour is water in it's gas form. It's invisible, 'dissolved' into the air. Steam is where the hot water vapour has condensed out of the air, it's a lot of small water droplets mixed in with the air.
Yes, there is a significant difference between a 100°C glass of water and a 200°C glass of water. At 100°C, water is at its boiling point and has turned into steam, while at 200°C, the water would be in vapor form and significantly hotter.
The forces between molecules in steam are weaker than the forces between molecules in liquid water. In steam, molecules are far apart and move freely, resulting in weak intermolecular forces. In liquid water, molecules are closer together and have stronger intermolecular forces due to hydrogen bonding.
It can be anywhere in between 60C and 100C (boiling point).
water is a liquid but water vapours is steam... when we boil water it will turn into steam which is called water vapours...
a steam boat is on the water and a train is on railroad tracks
mist steam are the condensed water vapour and we can see them but we cant see the water vapours
the difference is that water vapour is just one particle that joins together with more and more to form steam
The primary difference between a pressurized water reactor (PWR) and a boiling water reactor (BWR) is that in the BWR, water is actually boiled, and the steam is used to drive a steam turbine, while in the PWR, the primary coolant is not allowed to boil, but is circulated in a closed loop to boil water in a steam generator. The BWR circulates primary coolant through the steam turbine in a closed loop. The PWR contains the primary coolant in a loop that includes the steam generator, and not the steam turbine.
They are in 2 different states? The 3 states - Solid/Liquid/Gas.
A geyser - A fountain of hot water and steam that shoots into the air A fumarole - A "geyser" in which only steam escape So the different is geyser shoot out steam and a fumarole escape
The main difference between a diesel and a steam engine is the diesel engine is an internal combustion and the steam engine is external combustion.
Steam distilled water is produced by heating water to create steam, which is then condensed back into liquid form. Distilled water, on the other hand, is produced by boiling water and collecting the steam, which is then condensed into a separate container. Both methods remove impurities from the water, but steam distilled water may retain more of its natural minerals compared to distilled water.
boiler use many type of working fluids like water, Mercury, liquid sodium, etc., but steam generator works only with water as working fluid. hence all steam generator are boilers but all boilers are not steam generators...
When you heat the can with water, the water inside turns into steam. When the can is then placed in the cool water, the steam condenses back into water, creating a pressure difference between the inside and outside of the can. This pressure difference causes the can to collapse.
boiler use many type of working fluids like water, mercury, liquid sodium, etc., but steam generator works only with water as working fluid. hence all steam generator are boilers but all boilers are not steam generators...