16LPM
The density of domestic LPG in gaseous form is 2.155 kilograms per cubic meter. Its density in liquid form is 553 kilograms per cubic meter.
In India, you have 14.2 Kg of gas filled in domestic cylinder. It contains methane and ethane mixed in "liquid" form. Mass of methane is 16 and that of ethane is 28. Mass of oxygen is 16*2=32. So roughly mass of them you take to be same. Now 1 gram of water turns up into into 1600 ml of vapour or gas. So mass of LPG is 14.2 and you round up it to 14 Kg. So mass of LPG is 14* 1000 =14,000 grams. So LPG would have in "Gas" form, it's mass would have 14,000/1600 = 8.75 grams. You round up it to 10 grams. (This should make up for, you have oxygen molecule heavier than LPG molecule.) So answer would be approximately "only" 10 grams of oxygen can be filled at room temperature, in LPG cylinder. If you store oxygen below minus 183 degree centigrade, you can store it in LPG cylinder and weight will be some where between 14 to 16 Kg.
LPG is filled in cylinders under pressure to keep it in its liquid state, which allows for more gas to be stored in a smaller volume. This enables easy transportation and storage of LPG cylinders for domestic and industrial use.
The conversion rate for LPG (liquefied petroleum gas) is approximately 0.51 kilograms per liter. This ratio can vary slightly depending on the specific composition and temperature of the LPG.
LPG is a cleaner fuel compared to kerosene and wood, producing fewer emissions and less indoor air pollution. LPG is also convenient to use, with reliable supply and easily controllable flames. Additionally, LPG burns more efficiently, providing more heat output compared to kerosene or wood.
LPG contains propane (C3H8) and butane (C4H10)
Refer to related link below.
no that is silly
The density of domestic LPG in gaseous form is 2.155 kilograms per cubic meter. Its density in liquid form is 553 kilograms per cubic meter.
Mercapta is added to LPG to make sure wheather it is leaking or not.
No difference what so ever. The only difference is in pricing because road use taxes are added to motor fuel LPG.
mostly for domestic purpose example for cooking
15kg , 14.5kg , 5kg , 21 kg ,10kg
260 INR..
In India, you have 14.2 Kg of gas filled in domestic cylinder. It contains methane and ethane mixed in "liquid" form. Mass of methane is 16 and that of ethane is 28. Mass of oxygen is 16*2=32. So roughly mass of them you take to be same. Now 1 gram of water turns up into into 1600 ml of vapour or gas. So mass of LPG is 14.2 and you round up it to 14 Kg. So mass of LPG is 14* 1000 =14,000 grams. So LPG would have in "Gas" form, it's mass would have 14,000/1600 = 8.75 grams. You round up it to 10 grams. (This should make up for, you have oxygen molecule heavier than LPG molecule.) So answer would be approximately "only" 10 grams of oxygen can be filled at room temperature, in LPG cylinder. If you store oxygen below minus 183 degree centigrade, you can store it in LPG cylinder and weight will be some where between 14 to 16 Kg.
LPG is filled in cylinders under pressure to keep it in its liquid state, which allows for more gas to be stored in a smaller volume. This enables easy transportation and storage of LPG cylinders for domestic and industrial use.
LPG (Liquid Petroleum Gas) Tanks are usually available in areas where access to a gas supply is not available. With a LPG Tank, the liquid vaporizes into gas in the upper level of the tank. The tanks are then tapped and connected to appliances for cooking and heating purposes.