In India, you have 14.2 Kg of gas filled in domestic cylinder. It contains methane and ethane mixed in "liquid" form. Mass of methane is 16 and that of ethane is 28. Mass of oxygen is 16*2=32. So roughly mass of them you take to be same. Now 1 gram of water turns up into into 1600 ml of vapour or gas. So mass of LPG is 14.2 and you round up it to 14 Kg. So mass of LPG is 14* 1000 =14,000 grams. So LPG would have in "Gas" form, it's mass would have 14,000/1600 = 8.75 grams. You round up it to 10 grams. (This should make up for, you have oxygen molecule heavier than LPG molecule.) So answer would be approximately "only" 10 grams of oxygen can be filled at room temperature, in LPG cylinder. If you store oxygen below minus 183 degree centigrade, you can store it in LPG cylinder and weight will be some where between 14 to 16 Kg.
A C-sized oxygen cylinder typically contains 340 liters of oxygen when filled to its maximum capacity.
The weight of oxygen in a tank can vary based on its size and pressure. A standard medical oxygen tank, such as an E cylinder, typically contains around 680 grams of oxygen when filled to its full working pressure.
Oxygen liquefies at a temperature of -183 degrees Celsius under normal atmospheric pressure.
An E oxygen cylinder typically contains around 680 liters of oxygen when filled to capacity. At a flow rate of 2 liters per minute, the cylinder would last approximately 340 minutes or about 5.7 hours.
An E cylinder typically holds around 680 liters of oxygen when filled to its working capacity at a pressure of 2,200 psi. This can vary slightly based on the manufacturer and filling pressure.
A C-sized oxygen cylinder typically contains 340 liters of oxygen when filled to its maximum capacity.
At normal room temperature, oxygen is a gas.
The weight of oxygen in a tank can vary based on its size and pressure. A standard medical oxygen tank, such as an E cylinder, typically contains around 680 grams of oxygen when filled to its full working pressure.
The pressure inside the cylinder of oxygen will increase as the temperature rises. This is because an increase in temperature causes the oxygen molecules to move faster and collide with the walls of the cylinder more frequently, resulting in a higher pressure.
Oxygen liquefies at a temperature of -183 degrees Celsius under normal atmospheric pressure.
An E oxygen cylinder typically contains around 680 liters of oxygen when filled to capacity. At a flow rate of 2 liters per minute, the cylinder would last approximately 340 minutes or about 5.7 hours.
Cylinder C contains the largest mass of oxygen as it is at the highest temperature, which means the oxygen molecules have higher average kinetic energy and will have a higher mass. Temperature is directly proportional to the average kinetic energy of gas molecules, so the cylinder at 260 K will have the most massive oxygen molecules.
An E cylinder typically holds around 680 liters of oxygen when filled to its working capacity at a pressure of 2,200 psi. This can vary slightly based on the manufacturer and filling pressure.
Oxygen is a gas (in both forms: O2 and O3) at normal pressure and temperature.
If an electric bulb is filled with oxygen gas, the filament inside the bulb would burn brighter and hotter than if it were filled with normal air. However, this can be dangerous as oxygen supports combustion and can increase the risk of a fire hazard if the filament overheats. It is not recommended to fill electric bulbs with pure oxygen gas.
Oxygen is a gas at room temperature. Gold is a solid, water is a liquid, and lightning is an electrical discharge.
75 degrees Celsius