What is the mass of atoms protons electrons and neutrons?

Answer 1

AnswerThe mass of a neutron is about one amu (Atomic Mass unit) and the mass of a proton is also about one amu. The neutron is very slightly more massive. However the mass of an electron is much, much less - around 1/1836th of an amu. The amu is now the unified atomic mass unit (u).

Proton: 1,007 276 466 77(10) atomic mass units (u)

Neutron: 1,008 664 915 6 (6) atomic mass units (u)

Electron: 5,485 799 094 3(23).10-4 atomic mass units (u)

hope this helped. :)

Answer 2

Proton: One AMU*

Neutron: One AMU*

Electron: Zero AMU*

An electron has mass, but compared to protons and neutrons, it is pretty much nothing.

AMU: Atomic Mass Unit

The mass of an electron is roughly 1/1800 AMU.

Answer 3

Jump to: navigation, search

This article is about the subatomic particle. For other uses, see Neutron (disambiguation).

NeutronThe quark structure of the neutron. Classification: Baryon Composition: 1 up quark, 2 down quarks Family: Fermion Interaction:Gravity,Weak, Strong Antiparticle: Antineutron Theorized: James Chadwick[1] (1932) Discovered: James Chadwick[2] (1932) Symbol(s): n, n0, N0 Mass:1.67492729(28)×10−27 kg

939.56556(81) MeV/c2

1.008664915(6) u[3] Mean lifetime: 885.7(8) s (free) Electric charge: 0 e

0 C Electric dipole moment: <2.9×10−26 e cm Electric polarizability: 1.16(15)×10−3 fm3 Magnetic moment: -1.9130427(5) μN Magnetic polarizability:3.7(20)×10−4 fm3 Spin: 1⁄2 Isospin: 1⁄2 Parity: +1 Condensed: I(JP) = 1⁄2(1⁄2+) The neutron is a subatomic particle with no net electric charge and a mass slightly larger than that of a proton. Neutrons are usually found in atomic nuclei. The nuclei of most atoms consist of protons and neutrons, which are therefore collectively referred to as nucleons. The number of protons in a nucleus is the atomic number and defines the type of element the atom forms. The number of neutrons determines the isotope of an element. For example, the carbon-12 isotope has 6 protons and 6 neutrons, while the carbon-14 isotope has 6 protons and 8 neutrons. While bound neutrons in stable nuclei are stable, free neutrons are unstable; they undergo beta decay with a lifetime of just under 15 minutes (885.7 ± 0.8 s).[4] Free neutrons are produced in nuclear fission and fusion. Dedicated neutron sources like research reactors and spallation sources produce free neutrons for the use in irradiation and in neutron scattering experiments. Even though it is not a chemical element, the free neutron is sometimes included in tables of nuclides. It is then considered to have an atomic number of zero and a mass number of one.

In 1930 Walther Bothe and H. Becker in Germany found that if the very energetic alpha particles emitted from polonium fell on certain light elements, specifically beryllium, boron, or lithium, an unusually penetrating radiation was produced. At first this radiation was thought to be gamma radiation, although it was more penetrating than any gamma rays known, and the details of experimental results were very difficult to interpret on this basis. The next important contribution was reported in 1932 by Irène Joliot-Curie and Frédéric Joliot in Paris. They showed that if this unknown radiation fell on paraffin or any other hydrogen-containing compound it ejected protons of very high energy. This was not in itself inconsistent with the assumed gamma ray nature of the new radiation, but detailed quantitative analysis of the data became increasingly difficult to reconcile with such a hypothesis. Finally, in 1932 the physicist James Chadwick in the George Holt building at the University of Liverpool performed a series of experiments showing that the gamma ray hypothesis was untenable. He suggested that in fact the new radiation consisted of uncharged particles of approximately the mass of the proton, and he performed a series of experiments verifying his suggestion.[5] These uncharged particles were called neutrons, apparently from the Latin root for neutral and the Greek ending -on (by imitation of electron and proton). The Feynman diagram of the neutron beta decay process

Because the neutron consists of three quarks, the only possible decay mode without a change of baryon number requires the flavour changing of one of the quarks via the weak nuclear force. The neutron consists of two down quarks with charge -1/3 and one up quark with charge +2/3, and the decay of one of the down quarks into a lighter up quark can be achieved by the emission of a W boson. By this means the neutron decays into a proton (which contains one down and two up quarks), an electron, and an electron antineutrino (antineutrino). Outside the nucleus, free neutrons are unstable and have a mean lifetime of 885.7±0.8 s (about 15 minutes), decaying by emission of a negative electron and antineutrino to become a proton:[6] : n0 → p+ + e− + νe This decay mode, known as beta decay, can also transform the character of neutrons within unstable nuclei. Bound inside a nucleus, protons can also transform via inverse beta decay into neutrons. In this case, the transformation occurs by emission of a positron (antielectron) and a neutrino (instead of an antineutrino): : p+ → n0 + e+ + νe The transformation of a proton to a neutron inside of a nucleus is also possible through electron capture: : p+ + e− → n0 + νe Positron capture by neutrons in nuclei that contain an excess of neutrons is also possible, but is hindered because positrons are repelled by the nucleus, and quickly annihilate when they encounter negative electrons. When bound inside of a nucleus, the instability of a single neutron to beta decay is balanced against the instability that would be acquired by the nucleus as a whole if an additional proton were to participate in repulsive interactions with the other protons that are already present in the nucleus. As such, although free neutrons are unstable, bound neutrons are not necessarily so. The same reasoning explains why protons, which are stable in empty space, may transform into neutrons when bound inside of a nucleus. Beta decay and electron capture are types of radioactive decay and are both governed by the weak interaction. : Main article: Neutron electric dipole moment The Standard Model of particle physics predicts a tiny separation of positive and negative charge within the neutron leading to a permanent electric dipole moment. The predicted value is, however, well below the current sensitivity of experiments. From several unsolved puzzles in particle physics, it is clear that the Standard Model is not the final and full description of all particles and their interactions. New theories going beyond the Standard Model generally lead to much larger predictions for the electric dipole moment of the neutron. Currently, there are at least four experiments trying to measure for the first time a finite neutron electric dipole moment. : Main article: anti-neutron The antineutron is the antiparticle of the neutron. It was discovered by Bruce Cork in the year 1956, a year after the antiproton was discovered. CPT-symmetry puts strong constraints on the relative properties of particles and antiparticles and, therefore, is open to stringent tests. The fractional difference in the masses of the neutron and antineutron is 9±5×10−5. Since the difference is only about 2 standard deviations away from zero, this does not give any convincing evidence of CPT-violation.[3] : Main article: dineutron : Main article: tetraneutron The existence of stable clusters of four neutrons, or tetraneutrons, has been hypothesised by a team led by Francisco-Miguel Marqués at the CNRS Laboratory for Nuclear Physics based on observations of the disintegration of beryllium-14 nuclei. This is particularly interesting because current theory suggests that these clusters should not be stable. The dineutron is another hypothetical particle. : Main article: neutronium : Main article: neutron star At extremely high pressures and temperatures, nucleons and electrons are believed to collapse into bulk neutronic matter, called neutronium. Presumably this is what happens in neutron stars. : Main article: neutron detection The common means of detecting a charged particle by looking for a track of ionization (such as in a cloud chamber) does not work for neutrons directly. Neutrons that elastically scatter off atoms can create an ionization track that is detectable, but the experiments are not as simple to carry out; other means for detecting neutrons, consisting of allowing them to interact with atomic nuclei, are more commonly used. A common method for detecting neutrons involves converting the energy released from such reactions into electrical signals. The nuclides 3He, 6Li, 10B, 233U, 235U, 237Np and 239Pu are useful for this purpose. A good discussion on neutron detection is found in chapter 14 of the book Radiation Detection and Measurement by Glenn F. Knoll (John Wiley & Sons, 1979). The neutron plays an important role in many nuclear reactions. For example, neutron capture often results in neutron activation, inducing radioactivity. In particular, knowledge of neutrons and their behavior has been important in the development of nuclear reactors and nuclear weapons. The fissioning of elements like uranium-235 and plutonium-239 is caused by their absorption of neutrons. Cold, thermal and hot neutron radiation is commonly employed in neutron scattering facilities, where the radiation is used in a similar way one uses X-rays for the analysis of condensed matter. Neutrons are complementary to the latter in terms of atomic contrasts by different scattering cross sections; sensitivity to magnetism; energy range for inelastic neutron spectroscopy; and deep penetration into matter. The development of "neutron lenses" based on total internal reflection within hollow glass capillary tubes or by reflection from dimpled aluminum plates has driven ongoing research into neutron microscopy and neutron/gamma ray tomography.[7][8][9] One use of neutron emitters is the detection of light nuclei, particularly the hydrogen found in water molecules. When a fast neutron collides with a light nucleus, it loses a large fraction of its energy. By measuring the rate at which slow neutrons return to the probe after reflecting off of hydrogen nuclei, a neutron probe may determine the water content in soil. Because free neutrons are unstable, they can be obtained only from nuclear disintegrations, nuclear reactions, and high-energy reactions (such as in cosmic radiation showers or accelerator collisions). Free neutron beams are obtained from neutron sources by neutron transport. For access to intense neutron sources, researchers must go to specialist facilities, such as the ISIS facility in the UK, which is currently the world's most intense pulsed neutron and muon source.[citation needed] Neutrons' lack of total electric charge prevents engineers or experimentalists from being able to steer or accelerate them. Charged particles can be accelerated, decelerated, or deflected by electric or magnetic fields. However, these methods have no effect on neutrons except for a small effect of an inhomogeneous magnetic field because of the neutron's magnetic moment. Exposure to free neutrons can be hazardous, since the interaction of neutrons with molecules in the body can cause disruption to molecules and atoms, and can also cause reactions which give rise to other forms of radiation (such as protons). The normal precautions of radiation protection apply: avoid exposure, stay as far from the source as possible, and keep exposure time to a minimum. Some particular thought must be given to how to protect from neutron exposure, however. For other types of radiation, e.g. alpha particles, beta particles, or gamma rays, material of a high atomic number and with high density make for good shielding; frequently lead is used. However, this approach will not work with neutrons, since the absorption of neutrons does not increase straightforwardly with atomic number, as it does with alpha, beta, and gamma radiation. Instead one needs to look at the particular interactions neutrons have with matter (see the section on detection above). For example, hydrogen rich materials are often used to shield against neutrons, since ordinary hydrogen both scatters and slows neutrons. This often means that simple concrete blocks or even paraffin-loaded plastic blocks afford better protection from neutrons than do far more dense materials. After slowing, neutrons may then be absorbed with an isotope which has high affinity for slow neutrons without causing secondary capture-radiation, such as lithium-6. Hydrogen-rich ordinary water effects neutron absorption in nuclear fission reactors: usually neutrons are so strongly absorbed by normal water that fuel-enrichement with fissionable isotope, is required. The deuterium in heavy water has a very much lower absorption affinity for neutrons than does protium (normal light hydrogen). Deuterium is therefore used in CANDU-type reactors, in order to slow ("moderate") neutron velocity, so that they are more effective at causing nuclear fission, without capturing them. Various nuclides become more stable by expelling neutrons as a decay mode; this is known as neutron emission, and happens commonly during spontaneous fission. Cosmic radiation interacting the earth's atmosphere continuously generates neutrons that can be detected at the surface. Nuclear fission reactors naturally produce free neutrons; their role is to sustain the energy-producing chain reaction. The intense neutron radiation can also be used to produce various radioisotopes through the process of neutron activation, which is a type of neutron capture. Experimental nuclear fusion reactors produce free neutrons as a waste product. However, it is these neutrons that possess most of the energy, and converting that energy to a useful form has proved a difficult engineering challenge. This also explains why this form of energy is likely to create around twice the amount of radioactive waste of a fission reactor, but with a short (50-100 years) decay period (as opposed to the 10,000 years for fission waste). [1] [2] : Main article: Neutron temperature A thermal neutron is a free neutron that is Boltzmann distributed with kT = 0.024 eV (4.0×10-21 J) at room temperature. This gives characteristic (not average, or median) speed of 2.2 km/s. The name 'thermal' comes from their energy being that of the room temperature gas or material they are permeating. (see kinetic theory for energies and speeds of molecules). After a number of collisions (often in the range of 10-20) with nuclei, neutrons arrive at this energy level, provided that they are not absorbed. In many substances, thermal neutrons have a much larger effective cross-section than faster neutrons, and can therefore be absorbed more easily by any atomic nuclei that they collide with, creating a heavier - and often unstable - isotope of the chemical element as a result. Most fission reactors use a neutron moderator to slow down, or thermalize the neutrons that are emitted by nuclear fission so that they are more easily captured, causing further fission. Others, called fast breeder reactors, use fission energy neutrons directly. These neutrons are thermal neutrons that have been equilibrated in a very cold substances such as liquid deuterium. These are produced in neutron scattering research facilities. Ultracold neutrons are produced by equilibration in substances with a temperature of a few kelvins, such as solid deuterium or superfluid helium. An alternative production method is the mechanical deceleration of cold neutrons. A fast neutron is a free neutron with a kinetic energy level close to 2 MeV (20 TJ/kg), hence a speed of 28,000 km/s. They are named fission energy or fast neutrons to distinguish them from lower-energy thermal neutrons, and high-energy neutrons produced in cosmic showers or accelerators. Fast neutrons are produced by nuclear processes such as nuclear fission. Fast neutrons can be made into thermal neutrons via a process called moderation. This is done with a neutron moderator. In reactors, typically heavy water, light water, or graphite are used to moderate neutrons. Fusion neutrons can have higher energies such as 14.1 MeV for D-T fusion, or 2.45 MeV for D-D fusion to 3He. See Nuclear fusion#Criteria and candidates for terrestrial reactions for a list. A fission energy neutron that is slowing down is often said to have intermediate energy. There are not many non-elastic reactions in this energy region, so most of what happens is just slowing to thermal speeds before eventual capture. Intermediate energy neutrons are a hazard in reactors owing to the existence of a resonance region in the fission cross section of fissile elements. Within this region there exist many local minima and local maxima of probability of causing fission; this means that a reactor operating with a significant population of intermediate neutrons in contact with fuel nuclei could exhibit dangerous transient response. In such reactors, other mechanisms of inherent stability must be provided, such as large hydrogen populations to provide Doppler broadening. These neutrons have more energy than fission energy neutrons and are generated in accelerators or in the atmosphere from cosmic particles. They can have energies as high as tens of joules per neutron.

Answer 4

Protons and neutrons have roughly the same mass (1 amu or "atomic mass unit"). Electrons have significantly less. So, to get an estimate for the atomic mass of an atom just add the protons and neutrons.

Answer 5

Common sea fans grow attached to the seabed and look like exotic plants. Unlike soft corals, they have a supporting skeleton that provides a framework and allows them to grow quite large. It is made mainly of a flexible, horny material called gorgonin and consists of a rod that extends down the inside of all except the smallest branches. In the common sea fan, the branches are mostly in one plane and form a mesh that is aligned at right angles to the prevailing current. This increases the amount of planktonic food brought within reach of the polyps, which are arranged all around the branches. Fishing nets dragged over the reef can damage common sea fans and, as they grow quite slowly, they take a long time to recolonize. Common sea fans are also collected, dried, and sold as souvenirs.

Answer 6

The mass of a proton and neutron is approximately 1 atomic mass unit (u) or 1.67 x 10^-27 kg, while the mass of an electron is much smaller at approximately 0.00055 u or 9.11 x 10^-31 kg. The mass of an atom is determined by the total number of protons, neutrons, and electrons it contains.

Answer 7

Proton = 1

Neutron = 1

Electron = 0.00054

Answer 8

proton mass = 1.00727638 amu = 1.6726 x 10-27 kg

electron mass = 0.0005446623 amu = 9.10938188 × 10-31 kg

neutron mass = 1.0086649156 amu = 1.6749 x 10-27 kg