Any fluid!!! It is like a pipette, however, it is usually more accurate because you can use a burette loader which allows fine tuning of the liquid but not as fine as a gilson pipette. Basically, it is just a piece of apparatus used measuring liquids.
Before beginning to record a reading, examine the burette closely. A burette has zero at the top with values increasing going down the scale. On the burette where the scale values increase going down, record digits by looking at the last graduation above the meniscus. A close look at the liquid level in a burette shows very clearly where the meniscus is located. The meniscus is the curve in the liquid level. When the burette is conditioned and filled, with no air bubbles or leaks, take an initial volume reading. A burette reading card with a black rectangle can help to take a more accurate reading. Read the bottom of the meniscus. Be sure that the user eyes are at the level of meniscus, not above or below. Reading from an angle, rather than straight on, results in a parallax error.
Yes, a burette is the best tool for measuring acidYes, a burette is the best tool for measuring acid
burette
In analytical chemistry so many experiments are to be carried out to analyse the chemical properties of solutions/substances. The accuracy of analysis depend on the accuracy of iteration. An accurate reading is possible when it is fixed at perfect vertical position. In order to hold burette in a perfect vertical position during experiment a clamp must be used.
If you have an acid in your conical flask then the base will go into the burette. The burette is used to measure the amounts of base you are adding and therefore you will be able to determine the end point which is normally determined by a colour change.
To remove any trace of other chemicals that may still be in the burette.
using pycnometry because the density of water is very accurate
To ensure that the actual volume of liquid delivered into the conical flask is read accurately
Yes, a burette is the best tool for measuring acidYes, a burette is the best tool for measuring acid
A ring clamp is used to hold a burette.
You must read the bible,understand what its saying and then you must do it !
Read this: http://www.ehow.com/how_7546321_dispose-neon-lights.html
The smallest possible burette reading is 0.10 and the uncertainty of a burette's reading is half of its smallest value (0.05).
A burette is used to very accurately measure liquid volumes.
burette
First remove all the solid particles from the burette using a scrubber. Then wash the burette with tap water followed by distilled water thoroughly (even the nozzle). Then wash the burette with the solution to be used in the burette.
In analytical chemistry so many experiments are to be carried out to analyse the chemical properties of solutions/substances. The accuracy of analysis depend on the accuracy of iteration. An accurate reading is possible when it is fixed at perfect vertical position. In order to hold burette in a perfect vertical position during experiment a clamp must be used.
Burette