0
What else can I help you with?
What volume in mLs of 0.100 M sodium hydroxide solution must be added to 20.0 mL of 0.08 M sulfuric acid solution to reach the end point?
To neutralize the sulfuric acid completely, you need a 1:2 molar ratio of sodium hydroxide to sulfuric acid. Therefore, you would need to add twice the amount of sodium hydroxide compared to the amount of sulfuric acid, which is 40.0 mL of the sodium hydroxide solution.
If you use potassium hydroxide instead of sodium hydroxide what salt would you make?
If you use potassium hydroxide instead of sodium hydroxide, you would make potassium salts instead of sodium salts. For example, if you reacted potassium hydroxide with hydrochloric acid, you would produce potassium chloride.
Which would you say is more corrosive of concentrated sulfuric acid and concentrated sodium hydroxide solution?
Concentrated sulfuric acid is more corrosive than concentrated sodium hydroxide solution. Sulfuric acid is a strong mineral acid that can cause severe burns upon contact with skin, while sodium hydroxide, also known as caustic soda, is a strong base that can cause similar damage but is generally less corrosive than sulfuric acid.
What is the opposite of sulfuric acid?
the diferance is what u think the difference is
What happens when sulphuric acid reacts with sodium hydroxide?
When sulfuric acid reacts with sodium hydroxide, a neutralization reaction occurs producing water and sodium sulfate as products. The balanced chemical equation for this reaction is: H2SO4 + 2NaOH -> 2H2O + Na2SO4.
What volume in mLs of 0.100 M sodium hydroxide solution must be added to 20.0 mL of 0.08 M sulfuric acid solution to reach the end point?
To neutralize the sulfuric acid completely, you need a 1:2 molar ratio of sodium hydroxide to sulfuric acid. Therefore, you would need to add twice the amount of sodium hydroxide compared to the amount of sulfuric acid, which is 40.0 mL of the sodium hydroxide solution.
If you use potassium hydroxide instead of sodium hydroxide what salt would you make?
If you use potassium hydroxide instead of sodium hydroxide, you would make potassium salts instead of sodium salts. For example, if you reacted potassium hydroxide with hydrochloric acid, you would produce potassium chloride.
Which would you say is more corrosive of concentrated sulfuric acid and concentrated sodium hydroxide solution?
Concentrated sulfuric acid is more corrosive than concentrated sodium hydroxide solution. Sulfuric acid is a strong mineral acid that can cause severe burns upon contact with skin, while sodium hydroxide, also known as caustic soda, is a strong base that can cause similar damage but is generally less corrosive than sulfuric acid.
What is added to sodium hydroxide that will get sodium sulphate and water?
You would need to add Sulphuric acid to make Sodium Sulphate + Water :)
What is the opposite of sulfuric acid?
the diferance is what u think the difference is
What happens when sulphuric acid reacts with sodium hydroxide?
When sulfuric acid reacts with sodium hydroxide, a neutralization reaction occurs producing water and sodium sulfate as products. The balanced chemical equation for this reaction is: H2SO4 + 2NaOH -> 2H2O + Na2SO4.
What observations do you make when you react potassium hydroxide with sodium carbonate?
You get a double decomposition reaction, producing sodium hydroxide and potassium carbonate, but actually there is no real reaction; the four substances remain in perfect equilibrium in solution.
What is the name of the salt when hydroxide reacts with sulphuric acid?
It all depends on what metal hydroxide is used. If you used sodium hydroxide, then the resulting salt would be sodium sulphate.
Which indicator would you use in the titration sulphuric acid with naoh?
In the titration of sulfuric acid with sodium hydroxide (NaOH), a pH indicator suitable for a strong acid-strong base titration, such as phenolphthalein, can be used. Phenolphthalein changes color at around pH 8.2-10, which is suitable for detecting the endpoint of the neutralization reaction between sulfuric acid and sodium hydroxide.
If you were to make sodium hydroxide from an oxide what oxide would you use?
Sodium hydroxide (NaOH) is formed.
How much sodium hydroxide and sulfuric acid is needed to react to make 50g of sodium sulfate?
To produce 50g of sodium sulfate, you would need 40.0g of sodium hydroxide (NaOH) and 98.0g of sulfuric acid (H2SO4) in a 1:1 molar ratio. This reaction would involve the following stoichiometry: 2NaOH + H2SO4 -> Na2SO4 + 2H2O.
What is chemical equation of drain cleaner?
Drain cleaners typically contain sodium hydroxide (NaOH) or sulfuric acid (H2SO4) as the active ingredient. The chemical equation for sodium hydroxide acting as a drain cleaner is: NaOH + H2O -> Na+ + OH- + H2O. Sulfuric acid's equation as a drain cleaner would be: H2SO4 + H2O -> H3O+ (hydronium ion) + HSO4- (bisulfate ion).
