at 74.9!
The water boiling point in Celsius is 100 °C.
Water (H2O) freezes at 0°C, and boils at 100°C.
No, you cannot boil water with dish soap. Dish soap is not a heating element and does not generate heat to boil water.
By increasing the pressure on the water, you can raise its boiling point above 100°C. This can be achieved in a pressure cooker, where the increased pressure allows the water to reach a higher temperature before boiling.
Steel is typically at room temperature, which is around 68-77°F (20-25°C).
212 f, 100 c
Depends on the pressure. A pressurized system will boil at a higher temp than one at atmospheric pressure. It is around 240-250 Deg F when under 15 psi
2010
212 degrees F
Water boils at 212 degrees Fahrenheit.
This is probably due to the lower atmospheric pressure found at such an altitude.
M.P=min TEMP From where a solid begins to melt. B.P=MIN TEMP FROM WHERE( MELTED SOLID) OR LIQUID BEGINS to boil.
60 ft
Helium boils at a temperature of -268.9 degrees Celsius (-452 degrees Fahrenheit).
Slower, the more water, the more time required to reach boiling temp.
No, rainwater and seawater will not boil at the same temperature. Seawater has a higher boiling point than rainwater due to the presence of dissolved salts and minerals, which raise the boiling point of the water.
yes they can like water if you remove all the pressure form a vial and have water in it the water will boil at room temp. while if you add pressure to water it is harder to boil.