I hate reading +
As the temperature of water increases, its volume will also increase due to thermal expansion. Additionally, the rate of chemical reactions in the water may also increase with higher temperature.
When hot metal is added into the water then the metal looses its energy into the water and this heat is gained by the water, so the temperature gets increases when hot metal added into it i.e final temperature is greater than initial temperature of water.
The melting point of ice decreases when salt is added.
When silver is added to water, it does not react with the water. Silver is a noble metal and is relatively unreactive with water at room temperature.
The density of water primarily depends on its temperature and salinity. As temperature increases, water density decreases because the molecules move farther apart. Higher salinity leads to increased density because the added salt molecules increase the mass of the water.
The temperature increase a bit.
Ammonium nitrate (NH4NO3) is a salt that will result in a temperature decrease when added to water due to its endothermic dissolution process. This means that as the salt dissolves in water, it absorbs heat from the surroundings, causing a decrease in temperature.
No, Epsom salt does not increase the temperature of boiling water. However, it can help to increase buoyancy and reduce the cooking time of certain vegetables when added to boiling water.
No, adding chemicals to water typically does not increase the temperature of the water. The temperature of the water is determined by its initial temperature and any external heat sources or processes. Chemical reactions involving the added chemicals may release or absorb heat, but this would not necessarily increase the overall temperature of the water.
When calcium chloride is added to water, it increases the temperature of the water. This is due to the exothermic reaction that occurs when calcium chloride dissolves in water, releasing heat in the process.
Adding hot water will cause the greatest increase in water temperature, as it has a higher initial temperature. Adding ice will cause the greatest decrease in water temperature, as it absorbs heat from the water to melt and reach thermal equilibrium.
I would expect some increase in temperature to result from forcing water to move faster, since the faster moving water will have more friction with whatever channel or pipe it is moving in, and will have more turbulence which creates waste heat. But the increase in temperature could be very small.
The density of water increase, also the humidity of the atmosphere; the temperature decrease.
Wind, humidity, and temperature
To change the state of water from solid (ice) to liquid (water), heat must be added to increase the temperature above 0 degrees Celsius. To change water from liquid to gas (water vapor), heat must be added to increase the temperature above 100 degrees Celsius.
pure water (with no impurities added ) can only boil at 100 degrees Celsius , no other temperature . But if we add impurities to it than the temperature at which the water will boil can increase or decrease. Another point is that when we increase or decrease the atmospheric pressure, the temperature at which ordinary water boils (i.e.100 degrees Celsius) can also increase or decrease.
yeah the temperature does increase, when you increase the volume of water the temperature of calcium hydroxide increases too!