Ammonia is a gas a room temperature able to dissolve into water at a fairly descent rate. Unless the solution is super chilled to the boiling point of ammonia gas, which isn't likely to happen anyway as the solution would probably be solid, not to mention to dehydration of water by sulfuric acid is extremely exothermic which would boil off the pure ammonia. In addition ammonia is considered to be a fairly descent base and would react immediately with sulfuric acid to produce ammonium bisulfate which is very water soluble. Basically the removal of water with sulfuric acid from ammonia will never be a good idea.
Ammonia reacts with sulfuric acid to form ammonium sulfate, which is not volatile and therefore cannot be easily separated from the ammonia. This reaction also generates heat and can potentially release toxic gases, making it an unsafe and inefficient method for drying ammonia.
One way to convert dilute sulphuric acid to concentrated sulphuric acid is through a process called evaporation. In this method, the dilute acid is heated to evaporate the water content, leaving behind the concentrated acid. Another method involves adding concentrated sulphuric acid to the dilute solution until the desired concentration is achieved.
Concentrated sulfuric acid can react with ammonia gas to form ammonium sulfate, which is a solid. This reaction can result in clogging or blockage of the drying apparatus. Additionally, the strong exothermic nature of the reaction can lead to an increase in temperature, potentially causing safety hazards.
Concentrated sulfuric acid cannot be used to dry alkaline gases, most notably ammonia.
When potassium nitrate crystals are heated with concentrated sulphuric acid, nitric oxide gas (NO) is evolved. This is a result of the oxidation of nitrate ions in potassium nitrate by the sulphuric acid.
Ammonia reacts with sulfuric acid to form ammonium sulfate, which is not volatile and therefore cannot be easily separated from the ammonia. This reaction also generates heat and can potentially release toxic gases, making it an unsafe and inefficient method for drying ammonia.
One way to convert dilute sulphuric acid to concentrated sulphuric acid is through a process called evaporation. In this method, the dilute acid is heated to evaporate the water content, leaving behind the concentrated acid. Another method involves adding concentrated sulphuric acid to the dilute solution until the desired concentration is achieved.
concentrated nitric acid concentrated sulphuric acid
no
yes
There are many different concentrations of "concentrated sulphuric acid". It is possible to deduce the concentration of the sulphuric acid by titration.
Yes. Ammonia is a base that will neutralize sulfuric acid.
Concentrated sulfuric acid can react with ammonia gas to form ammonium sulfate, which is a solid. This reaction can result in clogging or blockage of the drying apparatus. Additionally, the strong exothermic nature of the reaction can lead to an increase in temperature, potentially causing safety hazards.
Concentrated sulfuric acid cannot be used to dry alkaline gases, most notably ammonia.
Sulphuric acid
When potassium nitrate crystals are heated with concentrated sulphuric acid, nitric oxide gas (NO) is evolved. This is a result of the oxidation of nitrate ions in potassium nitrate by the sulphuric acid.
Ammonium sulphate is a fertiliser that can be made by the neutralisation reaction between Ammonia and Sulphuric acid