answersLogoWhite

0

The lower pressure of the suction flask would cause the filtrate to boil. If this happened, the material in solution would be deposited over the walls of the flask.

(From Techniques and Experiments for Organic Chemistry by Addison Ault)

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Chemistry

How are soluble impurities removed during a recrystallization?

Soluble impurities are removed during recrystallization by dissolving the impure solid in a hot solvent, then filtering the hot solution to remove insoluble impurities. The solution is then cooled slowly, allowing the pure compound to crystallize out while the impurities remain in solution. The pure crystals can be separated from the solution by filtration.


Why the vanillin solution cooled in an ice bath before vacuum filtration?

it might be due to the fact that decrease in temperature result in precipitate formation. so if you cool it precipitates will form and ultimately you can easily separate out these precipitates using vaccum filteration


What is the difference between Hirsch funnel and Buchner funnel?

A Hirsch funnel is cylindrical and typically used for vacuum filtration of small volumes with the help of filter paper. A Buchner funnel is a flat-bottomed funnel with a porous porcelain or glass disc used for vacuum filtration of larger volumes, sometimes without the need for filter paper.


When gravity filtration is too slow what is the alternative filtration?

When gravity filtration is too slow, an alternative method is vacuum filtration. In vacuum filtration, a vacuum pump is used to create a pressure difference between the filter flask and the receiving flask, which improves the speed of the filtration process by helping to pull the liquid through the filter paper more quickly.


How you increase the rate of filtration through gooch crucible?

To increase the rate of filtration through a Gooch crucible, you can try a few things: use a vacuum filtration setup, reduce the particle size of the substance being filtered, apply gentle suction to the filter paper, and ensure that the crucible is properly packed with the filter aid to support faster drainage.

Related Questions

How are soluble impurities removed during a recrystallization?

Soluble impurities are removed during recrystallization by dissolving the impure solid in a hot solvent, then filtering the hot solution to remove insoluble impurities. The solution is then cooled slowly, allowing the pure compound to crystallize out while the impurities remain in solution. The pure crystals can be separated from the solution by filtration.


Would you recommend a suction filtration for a solution in which ether is the solvent?

No, I would not recommend using suction filtration for a solution with ether as the solvent. Ether is highly flammable and volatile, which can create a risk of fire or explosion during the filtration process. It is safer to use alternative methods such as gravity filtration or rotary evaporation for filtering solutions with ether.


Why is the naphthalene solution cooled in an ice bath before vacuum filtration by recrystallization?

Cooling the naphthalene solution in an ice bath helps to promote the formation of pure crystals by reducing the solubility of impurities. When the solution is cooled, the naphthalene crystallizes out, while most impurities remain dissolved in the solution. This improves the efficiency of the vacuum filtration process by ensuring a higher purity product.


What are the differences between a water filtration vacuum and a HEPA filtration vacuum in terms of their effectiveness in removing allergens and pollutants from the air?

A water filtration vacuum uses water to trap particles, while a HEPA filtration vacuum uses a filter to capture tiny particles. HEPA filtration vacuums are more effective in removing allergens and pollutants from the air compared to water filtration vacuums.


Why is vacuum filtration faster than gravity filtration?

Vacuum filtration is used instead of gravity filtration in order to achieve a dryer product in less time. The faster process of vacuum filtration allows the slurry to remain cold and in cases such as with benzoic acid more crytals will remain formed at colder temperatures. Gravity filtration is most useful when the solid is to be discarded and the filtrate (the liquid that flows through the filter paper) kept. Vacuum filtration is often faster than gravity filtration and is most useful if the solid must be kept or if a filtration must be done rapidly. A vacuum from an aspirator or a vacuum pump is used to pull the liquid through a funnel containing a piece of filter paper, while the solid is left on the paper.


In the isolation of aspirin why was vacuum filtration used instead of gravity filtration?

Vacuum filtration was used instead of gravity filtration in the isolation of aspirin to speed up the filtration process by applying negative pressure to draw the solvent through the filter paper more quickly. This helps to separate the solid product from the solvent more efficiently and saves time in the isolation process.


Why is a hepa vacuum better than the other vacuums?

Hepa vacuums offer extra filtering so that allergens aren't released back into the air. Dyson is one of the top makers of vacuums that offer hepa filtration.


Why the vanillin solution cooled in an ice bath before vacuum filtration?

it might be due to the fact that decrease in temperature result in precipitate formation. so if you cool it precipitates will form and ultimately you can easily separate out these precipitates using vaccum filteration


What is the difference between Hirsch funnel and Buchner funnel?

A Hirsch funnel is cylindrical and typically used for vacuum filtration of small volumes with the help of filter paper. A Buchner funnel is a flat-bottomed funnel with a porous porcelain or glass disc used for vacuum filtration of larger volumes, sometimes without the need for filter paper.


When gravity filtration is too slow what is the alternative filtration?

When gravity filtration is too slow, an alternative method is vacuum filtration. In vacuum filtration, a vacuum pump is used to create a pressure difference between the filter flask and the receiving flask, which improves the speed of the filtration process by helping to pull the liquid through the filter paper more quickly.


Why the suction of a vacuum filtration apparatus is broken before the vacuum is turned off?

Releasing the suction of a vacuum filtration apparatus before turning off the vacuum prevents any potential backflow of liquid into the vacuum pump, which could damage the pump. It also helps to avoid contamination and spillage of the filtrate.


Why is it necessary to use thick-walled tubing in vacuum filtration?

Thick-walled tubing is used in vacuum filtration because it can withstand the negative pressure created by the vacuum without collapsing or kinking. Thinner-walled tubing may collapse under the pressure, impeding the flow of the filtrate and disrupting the filtration process.