0
A hot water heater thermocouple can go bad repeatedly due to factors such as excessive heat exposure, corrosion, or poor installation. It's important to check for proper venting, gas pressure, and pilot flame adjustment to prevent premature failure of the thermocouple. Regular maintenance and ensuring all components are functioning correctly can help prevent repeated failures.
What else can I help you with?
Does a hot water heater give off bad fumes?
A properly functioning hot water heater should not give off bad fumes. However, if you notice any unusual odors coming from your hot water heater, it could indicate a potential gas leak or another issue that requires immediate attention from a professional.
When does water go bad and become unsafe to drink?
Water can become unsafe to drink when it is contaminated with harmful bacteria, viruses, or chemicals. It is important to ensure that water is properly treated and stored to prevent it from going bad.
How long does tap water last before it goes bad?
Tap water does not typically go bad, as it does not spoil or expire. However, it is recommended to consume tap water within a few days to ensure freshness and taste.
How long can water be stored before it goes bad?
Water can be stored for about 6 months to 1 year before it may start to go bad. It is important to store water properly in a clean, airtight container to prevent contamination.
Why does distilled water taste so bad?
Distilled water contains only hydrogen and oxygen molecules and it doesnt contain any of the minerals that normal water contains. Normal water contains minerals such as calcium and iron. It probably tastes so bad because the minerals have been taken out of it. I hope this helped :)
Why is the pilot light keep going out on your hot water heater?
Spillage excessive condensate bad thermocouple draft
Why does your Richmond water heater pilot turn off?
It is most likely the thermocouple that is bad. That is what keeps the pilot light on. The thermocouple is the small tube that sits in the flame of the pilot and runs to the control valve.
Why does your gas water heater flame go out as soon as it lights. My pilot stays lit. Is this a bad T-Stat or gas valve?
sounds like you have a bad thermocouple. The thermocouple senses the pilot flame and produces voltage to tell main flame to light. Thermocouple can be bought at any hardware store.
When the pilot light cut off from the water heater for 2 days do you have to run water for it to reheat?
If the pilot light is on, the heater should come on by itself. If the pilot light is off then it has to be lit. If it will not stay on, the thermocouple is bad.
What does it mean when the water heater wont say lit?
Most likely the thermocouple is bad. The thermocouple is the little tube that sits in the flame of the pilot light. Runs from the pilot light to the control valve. Very simple to replace. Costs about $6.
Why does water heater pilot light go out when gas is turned on?
If the pilot light goes out when the gas is turned on, it could be due to a dirty or faulty thermocouple, a clogged pilot tube, or a problem with the gas supply. It's important to have a professional inspect and repair the water heater to ensure it is functioning safely and effectively.
If the warm manning gas heater pilot will light but goes out before the blower comes on what is wrong?
thermocouple is bad.
Hot water tank pilot can not stay light?
Spillage , bad thermocouple
Your hot water heaters pilot light is on but the heater wont come on?
The thermocouple is bad. The thermocouple is the small metal tube that sits in the pilot light flame and runs to the control valve. The thermocouple generates a very small electrical current that keeps the gas valve open. They go bad regularly. **** I would have to say to check to make sure the valve is not in the "Pilot" position. If it is then turn it to the "On' position. If it still isn't working then you may have a bad Gas Control Valve. If the thermocouple was bad the pilot light would not stay lit. If the pilot light stay lit, it is doing what it is supossed to do.
Need help about force heater why wont the heater stay running when the blue button is reslease after 30 sec?
You might have to try pushing the button for longer, or you might have a bad thermocouple.
What will cause the heater resistor to go bad repeatedly on 1986 Blazer Full Size. Heater motor is 1 year old?
Most Likely Your Blower Motor Is Going Bad.
Why does your water heater pilot light go out?
The thermocouple is bad. The thermocouple it the small metal tube that sits in the flame of the pilot light. Has a copper colored wire from that to the bottom of the control. They are easy enough to replace, just unscrew from the control and usually pull out of a spring clip at the pilot light. Costs $6 or so.
