0
What else can I help you with?
What do you think will happen if a thick copper wire is used as a fuse?
Using a thick copper wire as a fuse is not recommended because copper wire has low resistance and will not effectively limit the current flow in case of an overload. This can lead to damage of the circuit or equipment and potentially cause a fire hazard due to excessive current passing through the wire. It's important to use the appropriate fuse rated for the circuit to ensure safety.
How do you fuse lead and copper?
It is not possible to fuse lead and copper together due to their differing melting points. Lead melts at a lower temperature than copper, so they would not form a strong bond when melted together. It is best to use mechanical methods such as soldering or welding to join lead and copper.
Which chemical coated on a copper item will fuse the 3volt bulb of a torch?
The chemical that can be coated on a copper item to fuse the 3-volt bulb of a torch is a strong oxidizing agent such as nitric acid or potassium permanganate. When these chemicals come into contact with the copper, they react with it, causing it to corrode rapidly and generate heat, which can potentially fuse the bulb. It is important to note that working with strong chemicals can be hazardous and should be done with proper safety precautions and in a well-ventilated area.
How can a person make their own fused glass?
To make fused glass, you would start by cutting pieces of glass to the desired shape and size. Then, arrange the glass pieces on a special heat-resistant surface, and place them in a kiln to melt and fuse together. Once the glass has cooled, it can be further shaped or polished as needed.
Why should a fuse be neither too weak nor too strong?
A fuse should not be too weak because it may blow too easily, causing frequent disruptions. On the other hand, a fuse should not be too strong because it may not blow when excessive current flows, posing a risk of electrical fires. It is important for a fuse to be appropriately rated to ensure proper protection for the electrical circuit.
Why does platinum wire fuse more easily on glass than copper wire?
Platinum wire fuses more easily on glass than copper wire due to its higher melting point and better thermal conductivity. When heated, platinum can create a strong bond with the glass surface, while copper may not adhere as effectively due to its lower melting point and tendency to oxidize. Additionally, the thermal expansion properties of platinum may allow it to form a more stable connection with glass compared to copper.
What does the AG mean on a Fuse?
Automobile Glass fuse
What is fuse wire?
copper and tin
What are the instructions for glass fusing?
The instructions to do glass fusing include melting glass at a high temperature to join and fuse glass together. One may need to use a glass kiln to successfully fuse glass.
How do you fuse Pokemon on Pokemon Platinum?
You can't
What is easily?
fuse
What is fuse wire made?
copper and tin
Is it safe to use copper to repair electrical fuse?
yes very safe.add. Fuse wire is usually made of tin-plated copper. The fuse wire may well get warm in service, and a bare copper wire will gradually oxidize and will fail sooner as a consequence.
What is easily blown?
fuse
What is the percentage of copper in fuse wires?
The percentage of copper in a fuse wire is very small or non existent. Fuse wire is made from mixing different types of alloys together of aluminum, nickel, iron and chromium. The alloys result in compounds called cronifer and aluchrom. The composition of the different fuse wires results in how the characteristics of the fuse fault current is handled.
What will happen if a thick copper wire is used in fuse?
If a thick copper wire is used in a fuse then by definition of a fuse this device would no longer be defined as a fuse. A fuse in a circuit is used to protect the conductors feeding the load of that circuit. The circuit, if using a thick copper wire in a fuse, would then be considered as a non fused circuit.
What is the material used for making fuse?
tungsten or sometimes copper
